Tally Charts, Frequency Tables, Pictographs and Block Graphs (and How to Find the Mode)

Statistics is the part of mathematics that deals with collecting, organising, displaying and interpreting data (information, usually numbers or categories). Schools, businesses and governments use it to make decisions: which snacks a school café should sell, which bus route needs more buses, how many vaccines a country needs. In this lesson you will follow the full statistics process – asking a question, collecting discrete data, using a tally chart and frequency table, drawing pictographs and block graphs, drawing conclusions, and finding the mode.

Step 1: Ask a question that data can answer

A good statistical question has an answer that varies and can be counted. “What is your favourite fruit?” is a good survey question because people give different answers that can be sorted into categories. “Do you like fruit?” gives much less useful information. A bigger investigation might ask: “What healthy snacks should our school café sell, and why?” – and then use survey questions to find out.

Step 2: Collect discrete data

Discrete data can only take separate, countable values – usually whole numbers or categories. Examples: the number of brothers and sisters you have (0, 1, 2, …), the number of goals scored, or favourite sport. (Data such as height or time, which can take any value on a scale, is called continuous – you will meet it in later forms.) Ways to collect data include:

  • Surveys and questionnaires – asking people questions.
  • Observation and counting – for example, counting cars passing the school gate.
  • Interviews – talking to people one at a time.
  • Experiments – for example, rolling a die 50 times.
  • Existing records – newspapers, books, websites and databases.

Step 3: Organise the data – tally chart and frequency table

Here are the favourite sports of 30 students, in the order they answered:

Football, Cricket, Netball, Football, Basketball, Cricket, Football, Athletics, Netball, Football, Cricket, Basketball, Football, Netball, Cricket, Athletics, Football, Basketball, Netball, Cricket, Football, Netball, Basketball, Cricket, Football, Athletics, Netball, Basketball, Cricket, Football.

Go through the list once. For every answer, make a tally mark (|) next to that sport. Every fifth mark is drawn across the previous four, so the marks are in easy-to-count bundles of five. The frequency is how many times each answer occurs.

Hand-drawn tally marks in bundles of five showing 11, 12 and 13
Figure 1 – Tally marks for 11, 12 and 13: two bundles of five, then single strokes. Image: 293u8h1, CC0, via Wikimedia Commons.
SportTallyFrequency
Football|||| ||||9
Cricket|||| ||7
Netball|||| |6
Basketball||||5
Athletics|||3
Total30
Table 1 – Tally chart and frequency table of favourite sports.

Always check that the frequencies add up to the number of answers: 9 + 7 + 6 + 5 + 3 = 30 ✔

Step 4: Display the data

Pictographs

A pictograph (pictogram) uses a small picture or symbol to stand for a number of items. It must have a key. With 30 students, one symbol for every 2 students keeps the graph short; half a symbol stands for 1 student.

Football
Cricket
Netball
Basketball
Athletics
Figure 2 – Pictograph of favourite sports. Key: = 2 students (a half symbol = 1 student).

Football has 9 students: 9 ÷ 2 = 4 remainder 1, so it gets 4 whole symbols and a half symbol.

Block graphs

A block graph stacks one block (a square) for each item or for a fixed number of items. Blocks are the same size and sit on a common baseline, and the vertical axis is numbered from 0 with an even scale. Give the graph a title and label both axes. A block graph is a stepping stone to the bar graphs you will draw in Term 2. Try building one in the interactive below.

TRY ITTally chart, frequency table and block graph

Collect your own data: press a button for each answer. The tally marks, frequency table, block graph and mode update as you go.

Survey question: “What is your favourite fruit?” Press a button each time someone answers.

FruitTallyFrequency
Total0

Block graph (1 block = 1 person):

Block graph

Step 5: Interpret and draw conclusions

Reading a graph means answering questions such as: Which category is biggest or smallest? How many more chose one option than another? What fraction of the total chose a category? Drawing a conclusion means saying what the data tells us about the original question – and noticing its limits.

  • Football is the most popular sport (9 students) and athletics the least popular (3 students).
  • 9 − 3 = 6 more students chose football than athletics.
  • Conclusion: in this group, a football club would probably attract the most members. But only 30 students were asked, so the result might be different for the whole school.

The mode

The mode is the value (or category) that occurs most often – the one with the highest frequency. In Table 1 the mode is football. A set of data can have more than one mode if two values tie, or no useful mode if every value occurs equally often.

Worked example: The mode from a frequency table

Question: 25 students were asked how many brothers and sisters they have. Find the mode and answer the questions.

  1. Table: 0 siblings – 4 students; 1 sibling – 9 students; 2 siblings – 7 students; 3 siblings – 3 students; 4 siblings – 2 students.
  2. The highest frequency is 9, and it belongs to the value 1 sibling.
  3. Check the total: 4 + 9 + 7 + 3 + 2 = 25 ✔
  4. Students with 2 or more siblings: 7 + 3 + 2 = 12.

Answer: The mode is 1 sibling (not 9 – the 9 is the frequency, not the value).

Common mistakes

  • Giving the frequency as the mode. The mode is the value with the highest frequency (“1 sibling”, “football”), not the frequency itself.
  • Ignoring the pictograph key. If one symbol stands for 4 people, 3 symbols mean 12 people, not 3.
  • Drawing the fifth tally mark as a fifth upright stroke. The fifth mark crosses the other four, making a bundle you can count by fives.
  • Uneven blocks or scales. Every block must be the same size, and the numbers on the axis must go up in equal steps from 0.
  • Not checking the total. If the frequencies do not add up to the number of answers, a tally was missed or doubled.

Practice questions

Try these yourself first, then open each answer to check your working.

1. How do you show a frequency of 13 with tally marks?

Show answer

Two bundles of five (four strokes with a fifth across them), then three single strokes: 5 + 5 + 3 = 13.

2. These are the colours of 15 cars that passed a school gate (R = red, B = blue, W = white, S = silver): R, B, W, W, S, R, W, B, W, S, W, R, B, W, S. Make a frequency table and find the mode.

Show answer

Red 3, Blue 3, White 6, Silver 3 (total 15). The mode is white.

3. In a pictograph, one book symbol stands for 4 books. A row shows 3½ symbols. How many books is that?

Show answer

3½ × 4 = 14 books.

4. Using the siblings table in the worked example, how many students were asked, and how many have no brothers or sisters?

Show answer

25 students were asked; 4 have no siblings.

5. Why is “Which bus route do you use to get to school?” a better survey question than “Do you take the bus?” for planning bus routes?

Show answer

It gives the actual routes (categories that can be counted), so planners can see which routes are used most. “Do you take the bus?” only gives yes or no.

6. In a block graph each block stands for 5 people. The “Mango” column has 9 blocks. How many people chose mango?

Show answer

9 × 5 = 45 people.

Quick check

1. What is discrete data?

Show answer

Data that can only take separate, countable values, such as whole numbers or categories.

2. What does the frequency column in a table tell you?

Show answer

How many times each value or category occurs.

3. What must every pictograph have so that it can be read?

Show answer

A key showing how many items each symbol stands for.

4. What is the mode?

Show answer

The value or category that occurs most often (highest frequency).

Next: Introduction to Algebra: Variables, Constants, Expressions and Substitution

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.3 Statistics and Probability, Topic 1.3.1 Statistics – Learning Outcomes 1.3.1.1 (formulating a problem or questions that data can answer), 1.3.1.2 (collecting discrete data), 1.3.1.3 (tallying ungrouped discrete data into a frequency table), 1.3.1.4 (constructing pictographs and block graphs with suitable scales), 1.3.1.5 (interpreting them), 1.3.1.6 (drawing conclusions from them) and 1.3.1.7 (finding the mode from a frequency table).

Attributions to media used in this post:

Tally Marks.png – 293u8h1 – CC0 (via Wikimedia Commons)

© 2026 Vedesh Kungebeharry. All rights reserved.

Sets for Beginners: Set Notation, Types of Sets, Subsets and Venn Diagrams

A set is a collection of objects, numbers or ideas that belong together. Each object in a set is called a member or an element. For example, the colours of the flag of Trinidad and Tobago form the set {red, white, black}. Sets help us sort and classify things, and they are the starting point for Venn diagrams, probability and logic. This lesson covers naming and describing sets, the main types of sets, subsets, and the ideas of union, intersection and complement shown on Venn diagrams.

Naming and describing a set

  • Name a set with a capital letter and put its members inside curly brackets { }, separated by commas: V = {a, e, i, o, u}.
  • A set must be well defined: you must be able to say for certain whether something belongs. “Even numbers” is well defined; “nice songs” is not.
  • You can define a set in two ways: by listing the members, V = {a, e, i, o, u}, or by describing them in words, V = {vowels in the English alphabet}.
  • The symbol ∈ means “is a member of” and ∉ means “is not a member of”: e ∈ V, but b ∉ V.
  • n(A) means the number of members in set A. For the vowels, n(V) = 5.
  • Each member is listed only once, and the order does not matter: {1, 2, 3} is the same set as {3, 1, 2}.

Types of sets

TypeMeaningExample
Empty (null) setHas no members. Written { } or ∅.{months with 32 days} = { }
Finite setYou could count all its members.{pupils in your class}
Infinite setThe members go on forever. Use “…” in a list.{multiples of 5} = {5, 10, 15, …}
Equal setsExactly the same members (A = B).{letters in LISTEN} = {letters in SILENT}
Equivalent setsThe same number of members, n(A) = n(B), even if the members differ.{1, 2, 3} and {a, b, c}

Subsets

If every member of set A is also in set B, then A is a subset of B, written A ⊂ B (some books write A ⊆ B). For example, {2, 4} ⊂ {1, 2, 3, 4, 5}. Two useful facts: the empty set is a subset of every set, and every set is a subset of itself. When we classify the members of a set, we divide it into subsets: {1, 2, 3, 4, 5, 6} can be split into the subsets {odd numbers} = {1, 3, 5} and {even numbers} = {2, 4, 6}.

Universal set, complement, union and intersection

  • The universal set, U, contains every member being talked about in a question – for example U = {whole numbers from 1 to 12}.
  • The complement of A, written A′, is everything in U that is not in A.
  • The union A ∪ B is everything in A or B or both (join the sets together, without repeats).
  • The intersection A ∩ B is everything in both A and B (the overlap).
  • Sets that share at least one member are intersecting sets. Sets with no members in common are disjoint: A ∩ B = { }.

Venn diagrams

A Venn diagram shows sets as circles inside a rectangle that stands for U. Overlapping circles show intersecting sets; separate circles show disjoint sets; a circle drawn completely inside another shows a subset. Members outside every circle are still in U – do not forget to write them in the rectangle.

Stained-glass window showing three overlapping coloured circles of a Venn diagram
Figure 1 – A Venn diagram in a stained-glass window at Gonville and Caius College, Cambridge, honouring John Venn, who made these diagrams famous in 1880. Image: Schutz (photo); stained glass designed by Maria McClafferty, CC BY-SA 2.5, via Wikimedia Commons.

TRY ITVenn diagram builder

Choose a rule for set A and for set B. Every number from 1 to 20 drops into the correct region, and the sets are written out for you in set notation.

Universal set: U = {whole numbers from 1 to 20}

Venn diagram of sets A and B U AB

Worked examples

Example 1: Listing a set

Question: List the members of A = {odd numbers between 2 and 12} and find n(A).

  1. “Between 2 and 12” means we do not include 2 or 12.
  2. The odd numbers in that range are 3, 5, 7, 9, 11.

Answer: A = {3, 5, 7, 9, 11}, n(A) = 5.

Example 2: Describing a set in words

Question: Describe the set {2, 4, 6, 8} in words.

  1. Look for what the members have in common: they are all even, start at 2 and stop at 8.

Answer: {even numbers from 2 to 8} (or {the first four even numbers}).

Example 3: Union, intersection and complement

Question: U = {whole numbers from 1 to 12}, A = {factors of 12} and B = {even numbers}. List A, B, A ∩ B, A ∪ B, A′ and (A ∪ B)′, and draw the Venn diagram.

  1. A = {1, 2, 3, 4, 6, 12} and B = {2, 4, 6, 8, 10, 12}.
  2. A ∩ B (in both) = {2, 4, 6, 12}. These go in the overlap.
  3. A only = {1, 3}; B only = {8, 10}.
  4. A ∪ B = {1, 2, 3, 4, 6, 8, 10, 12}.
  5. A′ (in U but not in A) = {5, 7, 8, 9, 10, 11}.
  6. (A ∪ B)′ (outside both circles) = {5, 7, 9, 11}.
  7. Check: n(A) + n(B) − n(A ∩ B) = 6 + 6 − 4 = 8 = n(A ∪ B) ✔

Answer: Venn diagram: 1 and 3 in A only; 2, 4, 6, 12 in the overlap; 8 and 10 in B only; 5, 7, 9, 11 outside the circles. (Choose “Factors of 20”, “Even numbers” and other rules in the builder above to practise more of these.)

Example 4: Equal or equivalent?

Question: Are {letters in LISTEN} and {letters in SILENT} equal sets? Are {1, 2, 3} and {a, b, c} equal?

  1. LISTEN gives {L, I, S, T, E, N} and SILENT gives {S, I, L, E, N, T} – the same six letters, so the sets are equal.
  2. {1, 2, 3} and {a, b, c} have different members, but both have 3 members.

Answer: The first pair are equal sets. The second pair are equivalent but not equal.

Example 5: Listing all subsets

Question: List every subset of {p, q, r}.

  1. No members: { }.
  2. One member: {p}, {q}, {r}.
  3. Two members: {p, q}, {p, r}, {q, r}.
  4. Three members: {p, q, r}.

Answer: 8 subsets. (A set with n members has 2n subsets: 23 = 8.)

Common mistakes

  • Repeating members. The letters in “BANANA” form the set {B, A, N}, not {B, A, N, A, N, A}.
  • Mixing up ∪ and ∩. Think “∪ for union = everything joined”; “∩ looks like an n for intersection = only the overlap”.
  • Forgetting members outside the circles. Every member of U must appear somewhere in the rectangle.
  • Confusing ∅ with {0}. ∅ has no members; {0} has one member, the number 0.
  • Using ∈ for sets. 3 ∈ {1, 3, 5} (a member), but {3} ⊂ {1, 3, 5} (a subset).

Practice questions

Try these yourself first, then open each answer to check your working.

1. List the set C = {prime numbers less than 20}. What is n(C)?

Show answer

C = {2, 3, 5, 7, 11, 13, 17, 19}, n(C) = 8.

2. Which of these sets are infinite?
(a) {multiples of 5}
(b) {pupils in your school}
(c) {even numbers less than 1,000,000}

Show answer

Only (a). Sets (b) and (c) are very large but could be counted, so they are finite.

3. U = {1, 2, 3, …, 10}, P = {1, 2, 3, 4, 5} and Q = {4, 5, 6, 7}. List P ∩ Q, P ∪ Q and Q′.

Show answer

P ∩ Q = {4, 5}; P ∪ Q = {1, 2, 3, 4, 5, 6, 7}; Q′ = {1, 2, 3, 8, 9, 10}.

4. Are {even numbers} and {odd numbers} disjoint or intersecting? Explain.

Show answer

Disjoint – no whole number is both even and odd, so their intersection is empty.

5. How many subsets does {a, b, c, d} have?

Show answer

24 = 16 subsets (including { } and the set itself).

6. True or false?
(a) 9 ∈ {square numbers}
(b) {3} ⊂ {1, 3, 5}
(c) 4 ∈ {odd numbers}

Show answer

(a) True
(b) True
(c) False.

7. In a class of 30 pupils, 18 play football, 15 play cricket and 8 play both. Draw a Venn diagram. How many play neither?

Show answer

Football only: 18 − 8 = 10. Cricket only: 15 − 8 = 7. Both: 8. That is 10 + 8 + 7 = 25 pupils, so 30 − 25 = 5 play neither.

Quick check

1. What does n(A) mean?

Show answer

The number of members (elements) in set A.

2. What is the difference between equal and equivalent sets?

Show answer

Equal sets have exactly the same members; equivalent sets just have the same number of members.

3. Which symbol means “intersection”?

Show answer

∩ (the members in both sets).

4. Where do you write members of U that are in neither A nor B?

Show answer

Inside the rectangle but outside both circles.

Next: Tally Charts, Frequency Tables, Pictographs and Block Graphs

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.2 Sets, Relations and Functions, Topic 1.2.1 Sets – Learning Outcomes 1.2.1.1 (classifying, describing and naming sets), 1.2.1.2 (defining sets by listing or describing), 1.2.1.3 (dividing a set into subsets), 1.2.1.4 (empty, equal, equivalent, finite and infinite sets), 1.2.1.5 (universal sets, complements, union, intersecting sets, subsets and disjoint sets) and 1.2.1.6 (Venn diagrams for two sets).

Attributions to media used in this post:

Venn-stainedglass-gonville-caius.jpg – Schutz (photo); stained glass designed by Maria McClafferty – CC BY-SA 2.5 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

How to Find the HCF and LCM

You already know how to find the factors and multiples of a number. In this lesson you will use them to find two very useful numbers: the highest common factor (HCF) and the lowest common multiple (LCM) of two or more numbers. You will learn three methods – listing, prime factors and the ladder – and how to tell which one a word problem needs.

Common factors and the HCF

  • A common factor of two numbers is a number that is a factor of both of them.
  • The factors of 12 are 1, 2, 3, 4, 6, 12. The factors of 18 are 1, 2, 3, 6, 9, 18. The common factors of 12 and 18 are 1, 2, 3 and 6.
  • The highest common factor (HCF) is the biggest of the common factors. The HCF of 12 and 18 is 6. (Some books call it the greatest common factor, GCF.)
  • 1 is a common factor of every pair of numbers. If the HCF is 1, the numbers have no other factor in common – for example 8 and 15.

Common multiples and the LCM

  • A common multiple of two numbers is a number that is in both of their times tables.
  • Multiples of 4: 4, 8, 12, 16, 20, 24, … Multiples of 6: 6, 12, 18, 24, … The common multiples of 4 and 6 are 12, 24, 36, …
  • The lowest common multiple (LCM) is the smallest of the common multiples (not counting 0). The LCM of 4 and 6 is 12.
  • The list of common multiples never ends, but each one is a multiple of the LCM: 12, 24, 36, 48, …

Tip: the HCF can never be bigger than the smaller number, and the LCM can never be smaller than the bigger number. Use this to check your answers.

Method 1: Listing

  1. For the HCF: list all the factors of each number (find them in pairs), ring the ones that appear in both lists, and pick the biggest.
  2. For the LCM: write out the multiples of the bigger number one at a time, and stop at the first one that the smaller number also divides into exactly.

Listing is quick for small numbers. For bigger numbers the lists get long, so use prime factors or the ladder instead.

Writing a number as a product of prime factors

Every whole number bigger than 1 can be written as prime numbers multiplied together. This is called its prime factorisation. A factor tree is an easy way to find it: split the number into any two factors, keep splitting until every branch ends in a prime, then multiply the primes at the ends of the branches.

Factor tree for 60: 60 splits into 6 and 10, 6 splits into 2 and 3, 10 splits into 2 and 5 60 6 10 2 3 2 5
Figure 1 – A factor tree for 60. The primes at the ends of the branches (in orange) give 60 = 2 × 2 × 3 × 5 = 22 × 3 × 5.

We write repeated primes with index notation: 2 × 2 = 22, so 60 = 22 × 3 × 5. It does not matter how you start the tree (60 = 4 × 15 or 60 = 2 × 30 work too) – you always end up with the same primes.

Method 2: Using prime factors

Write each number as a product of primes. For 24 and 36: 24 = 2 × 2 × 2 × 3 = 23 × 3 and 36 = 2 × 2 × 3 × 3 = 22 × 32.

  • HCF: take only the primes that are in both numbers, using the lower power of each. Both have 2s and 3s: the lower powers are 22 and 3. HCF = 22 × 3 = 4 × 3 = 12.
  • LCM: take every prime that appears in either number, using the higher power of each: 23 and 32. LCM = 23 × 32 = 8 × 9 = 72.
PrimePower in 24Power in 36For the HCF (lower)For the LCM (higher)
223222223
3332332

Method 3: The ladder (repeated division)

Write the two numbers side by side. Divide both by a prime that goes into both of them exactly, and write the answers underneath. Keep going until no prime (other than 1) divides both numbers.

Divide by2436
22436
21218
369
23
  • HCF = multiply the numbers down the left side: 2 × 2 × 3 = 12.
  • LCM = multiply the left side and the numbers left on the bottom row: 2 × 2 × 3 × 2 × 3 = 72.

A useful check for two numbers: HCF × LCM = the two numbers multiplied together. Here 12 × 72 = 864 and 24 × 36 = 864 ✔

HCF or LCM? Reading word problems

  • Use the HCF when you are sharing or cutting things into the largest equal groups or pieces, with nothing left over. Key words: largest, greatest, longest, share equally, as many identical bags as possible.
  • Use the LCM when things repeat and you want to know when they next happen together, or the smallest amount that fits both. Key words: next together, at the same time, smallest number, least.
  • Quick test: the HCF answer is smaller than the numbers in the question; the LCM answer is bigger.

TRY ITHCF and LCM finder

Choose two whole numbers from 2 to 200. The finder lists their factors and multiples, writes them as products of primes, works through the ladder and gives the HCF and LCM.

Worked examples

Example 1: HCF by listing

Question: Find the HCF of 16 and 40.

  1. Factors of 16: 1, 2, 4, 8, 16.
  2. Factors of 40: 1, 2, 4, 5, 8, 10, 20, 40.
  3. Common factors: 1, 2, 4, 8. The biggest is 8.

Answer: The HCF of 16 and 40 is 8.

Example 2: LCM by listing

Question: Find the LCM of 6 and 8.

  1. Multiples of the bigger number, 8: 8, 16, 24, …
  2. Does 6 divide 8? No. 16? No. 24? Yes, 24 = 6 × 4.

Answer: The LCM of 6 and 8 is 24. (Notice 6 × 8 = 48 is a common multiple, but it is not the lowest.)

Example 3: A factor tree

Question: Write 90 as a product of prime factors.

  1. Split 90 = 9 × 10.
  2. Split 9 = 3 × 3 and 10 = 2 × 5. All the branches now end in primes.
  3. Write the primes in order: 2 × 3 × 3 × 5.

Answer: 90 = 2 × 3 × 3 × 5 = 2 × 32 × 5.

Example 4: HCF and LCM using prime factors

Question: Find the HCF and the LCM of 36 and 60.

  1. 36 = 22 × 32 and 60 = 22 × 3 × 5.
  2. HCF: the shared primes are 2 and 3. Lower powers: 22 and 3. HCF = 4 × 3 = 12.
  3. LCM: every prime, higher power: 22, 32 and 5. LCM = 4 × 9 × 5 = 180.
  4. Check: 12 × 180 = 2,160 and 36 × 60 = 2,160 ✔

Answer: HCF = 12, LCM = 180.

Example 5: The ladder method

Question: Use the ladder to find the HCF and LCM of 48 and 72.

  1. Divide both by 2: 24 and 36. Again by 2: 12 and 18. Again by 2: 6 and 9. Then by 3: 2 and 3.
  2. No prime divides both 2 and 3, so stop.
  3. HCF = 2 × 2 × 2 × 3 = 24.
  4. LCM = 2 × 2 × 2 × 3 × 2 × 3 = 144.

Answer: HCF = 24, LCM = 144.

Example 6: Buses leaving together (LCM)

Question: Two buses leave the same terminal in San Fernando at 6:00 a.m. One leaves every 12 minutes and the other every 18 minutes. When will they next leave together?

  1. The buses repeat, and we want the next time they match, so we need the LCM.
  2. Multiples of 18: 18, 36, 54, … 12 does not divide 18, but 36 = 12 × 3.
  3. The LCM of 12 and 18 is 36, so they leave together every 36 minutes.

Answer: At 6:36 a.m.

Example 7: Gift bags (HCF)

Question: Mrs Ramdial has 24 mangoes and 36 oranges. She wants to pack them into identical gift bags, with nothing left over. What is the largest number of bags she can make, and what goes in each bag?

  1. Sharing into the largest number of equal groups means we need the HCF.
  2. Factors of 24: 1, 2, 3, 4, 6, 8, 12, 24. Factors of 36: 1, 2, 3, 4, 6, 9, 12, 18, 36. The HCF is 12.
  3. Each bag gets 24 ÷ 12 = 2 mangoes and 36 ÷ 12 = 3 oranges.

Answer: 12 bags, each with 2 mangoes and 3 oranges.

Common mistakes

  • Mixing up HCF and LCM. The HCF is a factor, so it is small (no bigger than the smaller number). The LCM is a multiple, so it is big (no smaller than the bigger number).
  • Just multiplying the numbers to get the LCM. 6 × 8 = 48 is a common multiple of 6 and 8, but the lowest is 24. Multiplying only gives the LCM when the HCF is 1, like 5 and 7.
  • Leaving a non-prime at the end of a factor tree. Keep splitting until every branch ends in a prime. 1 is not prime, so never write it in a factor tree.
  • Mixing up the powers. For the HCF use only the shared primes and the lower power; for the LCM use every prime and the higher power.

Practice questions

Try these yourself first, then open each answer to check your working.

1. (a) List the factors of 20 and of 30.
(b) Write down their common factors.
(c) What is the HCF of 20 and 30?

Show answer

(a) 20: 1, 2, 4, 5, 10, 20; 30: 1, 2, 3, 5, 6, 10, 15, 30
(b) 1, 2, 5, 10
(c) 10.

2. Find the HCF of:
(a) 18 and 27
(b) 32 and 48
(c) 14 and 15.

Show answer

(a) 9
(b) 16
(c) 1 – they have no other common factor.

3. Find the LCM of:
(a) 4 and 10
(b) 9 and 12
(c) 5 and 7.

Show answer

(a) 20
(b) 36
(c) 35 (= 5 × 7, because their HCF is 1).

4. Write each number as a product of prime factors, using index notation:
(a) 48
(b) 84
(c) 150.

Show answer

(a) 48 = 24 × 3
(b) 84 = 22 × 3 × 7
(c) 150 = 2 × 3 × 52.

5. Use your answers to question 4 to find the HCF and the LCM of 48 and 84.

Show answer

HCF = 22 × 3 = 12. LCM = 24 × 3 × 7 = 336. Check: 12 × 336 = 4,032 = 48 × 84 ✔

6. Ravi visits his grandmother in Arima every 6 days. His cousin visits her every 9 days. They were both there today. In how many days will they next both be there on the same day?

Show answer

LCM of 6 and 9 = 18, so in 18 days.

7. A tailor has two pieces of cloth, 84 cm and 126 cm long. She wants to cut both into pieces of the same length, as long as possible, with nothing left over.
(a) How long should each piece be?
(b) How many pieces will she get altogether?

Show answer

(a) HCF of 84 and 126 = 42 cm
(b) 84 ÷ 42 = 2 and 126 ÷ 42 = 3, so 5 pieces.

8. For a class sports day, hot dogs come in packs of 10 and buns come in packs of 8. What is the smallest number of hot dogs and buns you can buy so that there are exactly the same number of each? How many packs of each is that?

Show answer

LCM of 10 and 8 = 40. That is 40 ÷ 10 = 4 packs of hot dogs and 40 ÷ 8 = 5 packs of buns.

9. The HCF of two numbers is 6 and their LCM is 72. One of the numbers is 18. Find the other number.

Show answer

HCF × LCM = product of the numbers, so 6 × 72 = 432 = 18 × ?. The other number is 432 ÷ 18 = 24. Check: the HCF of 18 and 24 is 6 and the LCM is 72 ✔

10. Find
(a) the HCF
(b) the LCM
of 12, 18 and 30.

Show answer

12 = 22 × 3, 18 = 2 × 32, 30 = 2 × 3 × 5.
(a) HCF = 2 × 3 = 6
(b) LCM = 22 × 32 × 5 = 180.

Quick check

1. What is the HCF of 8 and 12?

Show answer

4.

2. What is the LCM of 3 and 5?

Show answer

15.

3. Can the HCF of two numbers ever be bigger than the smaller number?

Show answer

No – the HCF is a factor of the smaller number, so it cannot be bigger than it.

4. Two lights flash at different rates. Do you need the HCF or the LCM to find when they next flash together?

Show answer

The LCM – the flashes repeat and you want the first time they match.

Previous: Types of Numbers: Odd, Even, Prime, Composite, Square, Triangular and Rectangular

Next: Sets for Beginners: Set Notation, Types of Sets, Subsets and Venn Diagrams

Updates

2026/10/25

– First version of this lesson.

© 2026 Vedesh Kungebeharry. All rights reserved.

Types of Numbers: Odd, Even, Prime, Composite, Square, Triangular and Rectangular (Plus Factors and Multiples)

Whole numbers come in “families” with special properties. Knowing them makes multiplication, division, fractions and algebra much easier later on. In this lesson you will meet factors and multiples, odd and even numbers, prime and composite numbers, and three kinds of “shape” numbers – square, triangular and rectangular numbers – plus square roots.

Factors and multiples

  • A factor of a number divides into it exactly, with no remainder. The factors of 12 are 1, 2, 3, 4, 6 and 12.
  • A multiple of a number is the result of multiplying it by a whole number – the numbers in its times table. The multiples of 12 are 12, 24, 36, 48, …
  • They are two sides of the same fact: 3 × 4 = 12 means 3 and 4 are factors of 12, and 12 is a multiple of 3 and of 4.
  • A number has a limited (finite) list of factors, but its multiples go on forever.

Tip: find factors in pairs. Start at 1 and work upwards: 1 × 12, 2 × 6, 3 × 4. Stop when the pairs start to repeat.

Odd and even numbers

An even number divides exactly by 2 – it ends in 0, 2, 4, 6 or 8. An odd number leaves a remainder of 1 when divided by 2 – it ends in 1, 3, 5, 7 or 9. Only the last digit matters: 3,457 is odd and 10,000 is even. Useful patterns: even + even = even, odd + odd = even, odd + even = odd.

Prime and composite numbers

  • A prime number has exactly two factors: 1 and itself. Examples: 2, 3, 5, 7, 11, 13.
  • A composite number has more than two factors. Examples: 4 (1, 2, 4), 9 (1, 3, 9), 12.
  • 1 is neither prime nor composite, because it has only one factor.
  • 2 is the only even prime. Every other even number has 2 as a factor, so it is composite.
  • The 15 primes below 50 are: 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47.
Animated grid of numbers from 2 to 120 in which multiples of 2, 3, 5 and 7 are coloured and crossed out, leaving the prime numbers
Figure 1 – The Sieve of Eratosthenes. Cross out the multiples of 2, then 3, then 5, then 7 (but not the numbers themselves). The numbers left over are the primes. Image: SKopp at German Wikipedia, CC BY-SA 3.0, via Wikimedia Commons.

Testing whether a number is prime: try dividing it by the primes 2, 3, 5, 7, 11, … You only need to test primes whose square is not bigger than the number. If none divides exactly, the number is prime.

Square numbers and square roots

A square number is a whole number multiplied by itself. 4 × 4 = 16, so 16 is a square number. We write 4 × 4 as 42 (“four squared”). As dots, a square number makes a perfect square.

n123456789101112
n2149162536496481100121144

The square root undoes squaring. Since 42 = 16, the square root of 16 is 4. We write √16 = 4. Learn the table above both ways round: it gives you every square root up to √144 = 12.

Triangular and rectangular numbers

  • A triangular number can be drawn as a triangle of dots with rows of 1, 2, 3, … dots. 1 + 2 + 3 + 4 = 10, so 10 is triangular. The first ten are 1, 3, 6, 10, 15, 21, 28, 36, 45, 55 – each time, add the next counting number.
  • A rectangular number can be drawn as a rectangle of dots with at least 2 rows and at least 2 columns. 12 is rectangular because it makes a 2 × 6 or a 3 × 4 rectangle. Every composite number is rectangular; a prime number can only make a single line of dots. (Some books use “rectangular” or “oblong” number to mean only n × (n + 1), such as 2, 6, 12, 20 and 30 – check which meaning your teacher or textbook uses.)
  • Some numbers belong to several families. 36 is square (6 × 6), triangular (1 + 2 + … + 8) and rectangular (4 × 9).

TRY ITNumber explorer (1 to 100)

Choose a number. The explorer lists its factors, says whether it is odd or even, prime or composite, square, triangular or rectangular, and draws it as dots.

Dot picture:

Dots arranged to show the shape of the number

Worked examples

Example 1: All the factors of 36

Question: List the factors of 36 and describe what kind of number 36 is.

  1. Find factor pairs: 1 × 36, 2 × 18, 3 × 12, 4 × 9, 6 × 6. (5 does not divide 36. After 6 the pairs repeat.)
  2. List them in order: 1, 2, 3, 4, 6, 9, 12, 18, 36.
  3. 36 has more than two factors, so it is composite. 6 × 6 = 36, so it is a square number. 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 = 36, so it is triangular too.

Answer: Factors: 1, 2, 3, 4, 6, 9, 12, 18, 36. 36 is even, composite, square, triangular and rectangular.

Example 2: Is 91 prime?

Question: Is 91 a prime number?

  1. 10 × 10 = 100 is bigger than 91, so we only need to test the primes 2, 3, 5 and 7.
  2. 91 is odd, so 2 does not divide it. 9 + 1 = 10, which is not a multiple of 3, so 3 does not divide it. It does not end in 0 or 5, so 5 does not divide it.
  3. 91 ÷ 7 = 13 exactly.

Answer: No. 91 = 7 × 13, so it is composite. (Many people guess 91 is prime – it is a famous trap!)

Example 3: Is 97 prime?

Question: Is 97 a prime number?

  1. Again we test the primes 2, 3, 5 and 7 (because 10 × 10 = 100 > 97).
  2. 97 is odd; 9 + 7 = 16 is not a multiple of 3; it does not end in 0 or 5; 97 ÷ 7 = 13 remainder 6.

Answer: Yes, 97 is prime – no prime up to 7 divides it.

Example 4: Multiples

Question: Write the first five multiples of 7. Is 84 a multiple of 7?

  1. Multiply 7 by 1, 2, 3, 4, 5: 7, 14, 21, 28, 35.
  2. 84 ÷ 7 = 12 with no remainder.

Answer: 7, 14, 21, 28, 35. Yes, 84 = 7 × 12 is a multiple of 7.

Example 5: A square root

Question: Find √225.

  1. 225 ends in 5, so try 5: 225 ÷ 5 = 45, and 45 = 5 × 9 = 5 × 3 × 3.
  2. So 225 = 3 × 3 × 5 × 5. Pair the factors: (3 × 5) × (3 × 5) = 15 × 15.

Answer: √225 = 15. Check: 15 × 15 = 225 ✔

Example 6: Sorting numbers into families

Question: List the numbers between 20 and 40 that are
(a) prime
(b) square
(c) triangular.

  1. Primes: test each odd number – 23, 29, 31 and 37 have no factors other than 1 and themselves.
  2. Squares: 5 × 5 = 25 and 6 × 6 = 36.
  3. Triangular: continue 15 + 6 = 21, 21 + 7 = 28, 28 + 8 = 36, 36 + 9 = 45 (too big).

Answer:
(a) 23, 29, 31, 37
(b) 25, 36
(c) 21, 28, 36.

Common mistakes

  • Saying 1 is prime. A prime needs exactly two different factors; 1 has only one.
  • Thinking every odd number is prime. 9, 15, 21, 27, 33, 35, 39, 49, 51 and 91 are all odd but composite.
  • Mixing up factors and multiples. Factors are smaller or equal (they go into the number); multiples are equal or bigger (the times table).
  • Halving instead of square rooting. √16 = 4, not 8. And 32 = 3 × 3 = 9, not 3 × 2 = 6.

Practice questions

Try these yourself first, then open each answer to check your working.

1. List all the factors of 48.

Show answer

1, 2, 3, 4, 6, 8, 12, 16, 24, 48 (pairs: 1 × 48, 2 × 24, 3 × 16, 4 × 12, 6 × 8).

2. Which of these are prime: 27, 29, 33, 37, 39, 51?

Show answer

29 and 37. (27 = 3 × 9, 33 = 3 × 11, 39 = 3 × 13, 51 = 3 × 17.)

3. Write the next three triangular numbers after 28.

Show answer

36, 45, 55 (add 8, then 9, then 10).

4. Find √169 and √400.

Show answer

√169 = 13 (13 × 13 = 169) and √400 = 20 (20 × 20 = 400).

5. Find a number between 2 and 50 that is both a square number and a triangular number.

Show answer

36 (6 × 6, and 1 + 2 + … + 8).

6. Is the sum of two odd numbers odd or even? Give an example.

Show answer

Always even. For example, 7 + 9 = 16. Each odd number has one “left over”; the two left-overs make a pair.

7. Write 60 as the product of two whole numbers in as many ways as you can. How many factors does 60 have?

Show answer

1 × 60, 2 × 30, 3 × 20, 4 × 15, 5 × 12, 6 × 10. That gives 12 factors: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60.

Quick check

1. What is the only even prime number?

Show answer

2.

2. Is 1 prime, composite or neither?

Show answer

Neither – it has only one factor.

3. Name a number that is a multiple of 4 and a factor of 24.

Show answer

Any of 4, 8, 12 or 24.

4. Why can a prime number never be a rectangular number?

Show answer

Its only factors are 1 and itself, so its dots can only make a single row, never a rectangle with at least 2 rows and 2 columns.

Next: How to Find the HCF and LCM

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.1 Number Operations and Number Theory, Topic 1.1.1 Whole Numbers – Learning Outcome 1.1.1.6 (telling apart rectangular, triangular and square numbers; factors and multiples; odd and even numbers; prime and composite numbers; and square numbers and their square roots).

Attributions to media used in this post:

Sieve of Eratosthenes animation.gif – SKopp at German Wikipedia – CC BY-SA 3.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Rounding Whole Numbers and Estimating Quantities (Nearest 10, 100, 1,000 and Million)

Rounding means replacing a number with a simpler, “rounder” number that is close to it. A newspaper might say a stadium held “about 27,000 people” when the exact count was 27,465. Rounded numbers are easier to remember, say and calculate with. Estimating means making a sensible guess at a quantity or an answer without counting or calculating everything exactly. In this lesson you will round whole numbers to the nearest 10, 100, 1,000 and up to the nearest million, and use benchmarks such as 100 to estimate large quantities.

You will need to be confident with place value first – see Place Value and Number Names.

The rounding rule

  1. Find the rounding place (for example the hundreds digit if you are rounding to the nearest 100).
  2. Look at the digit immediately to its right – this is the “decider” digit.
  3. If the decider is 5, 6, 7, 8 or 9, round up: add 1 to the rounding digit.
  4. If the decider is 0, 1, 2, 3 or 4, round down: leave the rounding digit as it is.
  5. Replace every digit to the right of the rounding place with 0. Digits to the left do not change (unless rounding up turns a 9 into 10 – then carry, just like in addition).

Why does 5 round up? A number ending in exactly 5 is halfway between the two round numbers, and the usual convention in school maths is to round halfway values up. On a number line you can see that numbers above the halfway point are nearer the higher round number.

TRY ITRounding on a number line

Type a number and choose the place to round to. The number line shows the two “round” numbers on either side, the halfway point, and which one is nearer. Use the step buttons to see exactly where the answer changes.

(steps move the number by one tenth of the rounding place)

Number line for rounding

Worked examples

Example 1: One number, three different roundings

Question: Round 3,746 to the nearest 10, the nearest 100 and the nearest 1,000.

  1. Nearest 10: the tens digit is 4 and the decider (ones) is 6. 6 ≥ 5, so round up: 4 tens become 5 tens → 3,750.
  2. Nearest 100: the hundreds digit is 7 and the decider (tens) is 4. 4 < 5, so round down → 3,700.
  3. Nearest 1,000: the thousands digit is 3 and the decider (hundreds) is 7. Round up → 4,000.

Answer: 3,750; 3,700; 4,000. Notice that the answer depends on which place you round to.

Example 2: A decider of exactly 5

Question: Round 48,650 to the nearest 100 and to the nearest 1,000.

  1. Nearest 100: hundreds digit 6, decider (tens) 5. 5 means round up: 6 hundreds → 7 hundreds → 48,700.
  2. Nearest 1,000: thousands digit 8, decider (hundreds) 6. Round up: 8 thousands → 9 thousands → 49,000.

Answer: 48,700 and 49,000.

Example 3: Rounding large numbers

Question: Round 2,495,318 to the nearest 10,000 and to the nearest million.

  1. Nearest 10,000: the ten-thousands digit is 9 and the decider (thousands) is 5, so round up. 9 ten-thousands + 1 = 10 ten-thousands, so carry 1 into the hundred-thousands place: 249 ten-thousands become 250 ten-thousands → 2,500,000.
  2. Nearest million: the millions digit is 2 and the decider (hundred thousands) is 4. Round down → 2,000,000.

Answer: 2,500,000 and 2,000,000.

Example 4: Rounding up past a 9

Question: Round 69,960 to the nearest 100.

  1. The hundreds digit is 9 and the decider (tens) is 6, so round up.
  2. 699 hundreds + 1 = 700 hundreds. Write 700 hundreds as 70,000.

Answer: 70,000. (It is not 69,1000 or 691,000!)

Estimating quantities with a benchmark of 100

How many people are in a big crowd? How many beans are in a jar? Counting every single one would take far too long, so we estimate using a benchmark – a group whose size we know. A benchmark of 100 works well:

  1. Count out 100 objects (or 100 people in one part of a photo) and notice how much space they take up.
  2. Mentally group the rest of the objects into chunks of about the same size.
  3. Count the chunks and multiply by 100.
  4. Verify: if you can, count the real total and see how close you were.

Example 5: Estimating a crowd

Question: A photo of a crowd is divided into equal sections. One section contains about 100 people, and the crowd fills about 12 sections. Estimate the size of the crowd.

  1. Benchmark: 1 section ≈ 100 people.
  2. 12 sections ≈ 12 × 100.

Answer: about 1,200 people.

Estimating answers and giving answers to a degree of accuracy

Before you calculate, round each number to make a quick estimate. If your exact answer is far from the estimate, check your working. For example, 412 × 29 ≈ 400 × 30 = 12,000. The exact answer is 11,948, which is close, so it is reasonable.

Sometimes a question asks you to give your answer “to the nearest thousand” or “correct to the nearest hundred dollars”. Work out the exact answer first, then round it once at the end. Example: a school fair raised $18,653. To the nearest hundred dollars this is $18,700 (the tens digit, 5, means round up).

Common mistakes

  • Rounding in a chain. To round 1,448 to the nearest 100, look only at the tens digit (4) → 1,400. Do not round to 1,450 first and then to 1,500.
  • Forgetting the zeros. 3,746 to the nearest 100 is 3,700, not 37.
  • Looking at the wrong digit. The decider is always the digit immediately to the right of the rounding place.
  • Changing digits on the left. When you round down, the digits to the left of the rounding place stay exactly the same.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Round 8,362 to the nearest 10, the nearest 100 and the nearest 1,000.

Show answer

8,360 (decider 2); 8,400 (decider 6); 8,000 (decider 3).

2. Round 547,500 to the nearest 1,000.

Show answer

548,000. The decider (hundreds digit) is 5, so round up.

3. Round 13,952 to the nearest 100.

Show answer

14,000. The hundreds digit 9 rounds up to 10, so carry: 139 hundreds + 1 = 140 hundreds.

4. Round 7,649,999 to the nearest million and to the nearest 100,000.

Show answer

Nearest million: 8,000,000 (decider 6). Nearest 100,000: 7,600,000 (decider 4).

5. A whole number rounded to the nearest 10 is 250. What are the smallest and largest numbers it could be?

Show answer

Smallest 245, largest 254. (245 rounds up to 250; 255 would round up to 260.)

6. Estimate 4,812 + 3,197 by rounding each number to the nearest 1,000. Then find the exact answer.

Show answer

Estimate: 5,000 + 3,000 = 8,000. Exact: 8,009. Very close.

7. Estimate 58 × 21 by rounding each number to the nearest 10. Then find the exact answer.

Show answer

Estimate: 60 × 20 = 1,200. Exact: 1,218.

8. A photo of a beach is split into 20 equal squares. One square has about 100 people in it. Estimate the number of people on the beach.

Show answer

20 × 100 = about 2,000 people.

9. A builder needs 2,350 bricks. Write this number to the nearest hundred.

Show answer

2,400 (the decider, 5, rounds up).

Quick check

1. When rounding to the nearest 1,000, which digit decides whether you round up or down?

Show answer

The hundreds digit (the digit just to the right of the thousands place).

2. Does 45 round to 40 or 50 (nearest 10)?

Show answer

50. A decider of 5 always rounds up.

3. Why do we estimate before calculating?

Show answer

To get a rough idea of the answer, so we can tell if our exact answer is sensible.

4. What is a benchmark when estimating a quantity?

Show answer

A group of known size (such as 100 objects) used to judge how many there are altogether.

Next: Odd, Even, Prime, Composite, Square, Triangular and Rectangular Numbers

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.1 Number Operations and Number Theory, Topic 1.1.1 Whole Numbers – Learning Outcomes 1.1.1.4 (rounding to the nearest ten, hundred, thousand and up to millions), 1.1.1.5 (estimating a quantity using 100 as a benchmark and checking by counting) and 1.1.1.8 (solving whole-number problems and giving answers to a stated degree of accuracy).

© 2026 Vedesh Kungebeharry. All rights reserved.