Time: 12- and 24-Hour Clocks, Converting Units of Time and Working Out Durations

Time organises everything we do: school starts at 8:00, a flight leaves at 22:50, a match lasts 90 minutes and a year has 365 days. In this lesson you will learn the units of time and how they are linked, read and write times on the 12-hour and 24-hour clocks, convert between units, and work out how long events last – including events that pass midnight.

Units of time

UnitEquals
1 minute (min)60 seconds (s)
1 hour (h)60 minutes = 3,600 seconds
1 day24 hours
1 week7 days
1 year365 days (366 in a leap year), 52 weeks and 1 day, or 12 months
1 decade / century10 years / 100 years
A leap year has 29 February. Years divisible by 4 are leap years, except century years, which must be divisible by 400 (2000 was a leap year; 2100 will not be).

Time is not decimal: there are 60 minutes in an hour, not 100. So 2.5 hours is 2 hours 30 minutes (not 2 hours 50 minutes). Durations can be written in parts (3 h 30 min), as a fraction (312 h) or as a decimal (3.5 h).

We measure time with clocks and watches (analogue, with hands, or digital), stopwatches for short events like races, timers, and calendars for days, weeks and months.

A mechanical stopwatch with a white face marked from 0 to 60 seconds, lying on snow
Figure 1 – A mechanical stopwatch. The large hand counts seconds and the small dial counts minutes. Image: R. Henrik Nilsson, CC BY 4.0, via Wikimedia Commons.

The 12-hour and 24-hour clocks

  • The 12-hour clock counts from 12 to 12 twice a day, using a.m. (midnight to noon) and p.m. (noon to midnight).
  • The 24-hour clock counts the hours from 00 to 23 and always uses four digits: 07:30, 19:45. It is used for timetables, flights and the military because it can never be confused.
  • To change p.m. to 24-hour time, add 12 to the hours (7:45 p.m. → 19:45). For a.m. keep the hours, with a leading zero (9:05 a.m. → 09:05). Midnight is 00:00 and noon is 12:00.
  • To change 24-hour time to p.m., subtract 12 from hours of 13 or more (14:35 → 2:35 p.m.).
A large decorated clock face inside Florence Cathedral with a single hand and a dial marked with 24 hours
Figure 2 – A 24-hour clock painted by Paolo Uccello in 1443 in Florence Cathedral, Italy. Its hand goes round once a day. Image: Clock face by Paolo Uccello (1443); photograph released under CC0, CC0, via Wikimedia Commons.

Working out durations

The easiest method is to count on: from the start time, go up to the next whole hour, then count whole hours, then the minutes left. For example, 08:45 to 14:20 is 15 min (to 09:00) + 5 h (to 14:00) + 20 min = 5 h 35 min.

TRY ITTime duration calculator

Type a start time and an end time on the 24-hour clock. The calculator converts them to the 12-hour clock and counts on to find how long the event lasts – even past midnight.

Time line

Worked examples

Example 1: Converting clock times

Question: Write
(a) 14:35 and 09:05 in 12-hour time
(b) 7:45 p.m. in 24-hour time.

  1. (a) 14 − 12 = 2, so 14:35 is 2:35 p.m.; 09:05 is before noon, so 9:05 a.m.
  2. (b) 7 + 12 = 19, so 19:45.

Answer:
(a) 2:35 p.m. and 9:05 a.m.
(b) 19:45.

Example 2: Converting units

Question: Change
(a) 212 hours to minutes
(b) 200 minutes to hours and minutes
(c) 3.25 hours to minutes.

  1. (a) 2 h = 120 min and 12 h = 30 min: 150 min.
  2. (b) 200 ÷ 60 = 3 remainder 20: 3 h 20 min.
  3. (c) 3.25 × 60 = 195 min (0.25 h is a quarter of an hour, 15 min).

Answer: 150 min; 3 h 20 min; 195 min.

Example 3: A duration

Question: A school day runs from 08:45 to 14:20. How long is it?

  1. 08:45 → 09:00 is 15 min.
  2. 09:00 → 14:00 is 5 h.
  3. 14:00 → 14:20 is 20 min.
  4. Total: 5 h 35 min = 5 × 60 + 35 = 335 min.

Answer: 5 h 35 min.

Example 4: Past midnight

Question: A flight leaves at 22:50 and lands at 06:15 the next morning (same time zone). How long is the flight?

  1. 22:50 → 24:00 (midnight) is 1 h 10 min.
  2. 00:00 → 06:15 is 6 h 15 min.
  3. Add: 7 h 25 min.

Answer: 7 h 25 min.

Example 5: Finding an end time

Question: A football match kicks off at 19:45. Each half lasts 45 minutes, half-time is 15 minutes and there are 5 minutes of added time. When does it end?

  1. Total time: 45 + 15 + 45 + 5 = 110 min = 1 h 50 min.
  2. 19:45 + 1 h = 20:45; 20:45 + 50 min = 21:35.

Answer: 21:35 (9:35 p.m.).

Common mistakes

  • Treating time as decimal. 1.5 h is 1 h 30 min, and 2 h 45 min is not 2.45 h.
  • Subtracting clock times like ordinary numbers. 14:20 − 08:45 is not 5:75 or 5.75 h; count on instead.
  • Adding 12 to a.m. times, or forgetting that 12:30 a.m. is 00:30.
  • Forgetting the day changes when an event passes midnight.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Write 16:10 and 00:25 in 12-hour time, and 8:40 p.m. in 24-hour time.

Show answer

4:10 p.m.; 12:25 a.m.; 20:40.

2. Change
(a) 134 h to minutes
(b) 250 min to hours and minutes
(c) 3 hours to seconds.

Show answer

(a) 105 min
(b) 4 h 10 min
(c) 10,800 s.

3. A lesson runs from 09:40 to 11:05. How long is it?

Show answer

20 min + 1 h + 5 min = 1 h 25 min (85 min).

4. A bus leaves at 13:25 and the journey takes 2 h 50 min. When does it arrive?

Show answer

16:15.

5. A night shift runs from 23:15 to 04:40. How long is it?

Show answer

45 min + 4 h 40 min = 5 h 25 min.

6. A school has six 40-minute lessons, two 5-minute changeovers and a 30-minute break. If it starts at 08:00, when does it end?

Show answer

240 + 10 + 30 = 280 min = 4 h 40 min, and 08:00 + 4 h 40 min = 12:40.

7. How many hours are in a (non-leap) year?

Show answer

365 × 24 = 8,760 hours.

8. Which of these are leap years: 2024, 2025, 2028, 2100, 2000?

Show answer

2024, 2028 and 2000.

Quick check

1. How many minutes are in 0.5 h?

Show answer

30.

2. What is 18:00 on the 12-hour clock?

Show answer

6:00 p.m.

3. How many days are in 3 weeks?

Show answer

21.

Next: Solving Problems with Sets and Venn Diagrams

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.5 Measurement, Topic 1.5.6 Time – Learning Outcomes 1.5.6.1 (measuring how long events last, in suitable units), 1.5.6.2 (converting between seconds, minutes, hours, days, weeks and years) and 1.5.6.3 (solving problems involving time).

Attributions to media used in this post:

Ca 1970 mechanical stopwatch by Herwins Switzerland.jpg – R. Henrik Nilsson – CC BY 4.0 (via Wikimedia Commons)

Clock 24 hours Florence Cathedral.jpg – Clock face by Paolo Uccello (1443); photograph released under CC0 – CC0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Mass and Weight: Grams, Kilograms and Converting Units

How heavy is a bag of rice, a newborn baby or a truck of sand? To answer, we measure mass in grams and kilograms. This lesson explains the difference between mass and weight, the instruments used to measure them, how to write measurements in different ways, how to convert between grams and kilograms, and how to solve everyday problems. It works just like the metric length conversions in Units of Measurement.

Mass or weight?

Mass is the amount of matter (stuff) in an object. It is measured in grams (g) and kilograms (kg), and it is the same everywhere – on Earth, on the Moon or in space. Weight is the pull of gravity on that mass. Scientists measure weight in newtons, and it changes with gravity: on the Moon, gravity is about one sixth as strong, so a 60 kg astronaut would weigh about as much as a 10 kg object does on Earth, even though their mass is still 60 kg. In everyday life people say “weight” when they mean mass (“I weigh 45 kg”), and kitchen and bathroom scales are marked in kilograms.

Units and instruments

UnitSymbolSizeGood for
milligrammg1,000 mg = 1 gmedicines, a grain of sand
gramgabout the mass of a paper clipletters, food packets, coins
kilogramkg1 kg = 1,000 g; a litre of waterpeople, bags of rice, fruit
tonnet1 t = 1,000 kgcars, trucks, cargo

Instruments include a beam balance (compare an object with known masses), a kitchen scale, a bathroom scale, a spring balance (a hook and spring – this really measures weight) and a digital scale. Read a dial scale with your eye level with the pointer, and check that the scale shows 0 before you start.

An old brass two-pan balance with a set of iron weights beside it
Figure 1 – A two-pan balance. When the pans balance, the object has the same mass as the weights in the other pan. Image: Nikodem Nijaki, CC BY-SA 3.0, via Wikimedia Commons.
Six sports medals on ribbons lying on a white digital kitchen scale whose display reads 82
Figure 2 – A digital kitchen scale showing that six medals have a mass of 82 g. Image: Kpubkalanami, CC BY-SA 4.0, via Wikimedia Commons.

Writing and converting measurements

A mass can be written in several equivalent ways: 3 kg 100 g = 3,100 g = 3.1 kg = 3110 kg.

  • kg → g: multiply by 1,000 (move the decimal point 3 places right).
  • g → kg: divide by 1,000 (move the decimal point 3 places left).
  • Always change to the same unit before adding, subtracting or comparing.

Worked examples

Example 1: kg to g

Question: Convert 2.45 kg to grams.

  1. Grams are smaller, so multiply by 1,000.
  2. 2.45 × 1,000 = 2,450.

Answer: 2,450 g.

Example 2: g to kg

Question: Convert 750 g to kilograms.

  1. Kilograms are bigger, so divide by 1,000.
  2. 750 ÷ 1,000 = 0.75.

Answer: 0.75 kg (three quarters of a kilogram).

Example 3: Mixed units

Question: Write 5 kg 60 g in grams and in kilograms.

  1. 5 kg = 5,000 g, so 5 kg 60 g = 5,060 g. (Careful: 60 g, not 600 g.)
  2. 5,060 ÷ 1,000 = 5.06 kg.

Answer: 5,060 g = 5.06 kg.

Example 4: Adding masses

Question: A shopping bag holds 1.2 kg of flour, 750 g of sugar and two 450 g tins. What is the total mass?

  1. Change everything to grams: 1.2 kg = 1,200 g.
  2. 1,200 + 750 + 2 × 450 = 1,200 + 750 + 900 = 2,850 g.

Answer: 2,850 g = 2.85 kg.

Example 5: Sharing

Question: A 25 kg sack of rice is packed into 500 g bags. How many bags are filled?

  1. 25 kg = 25,000 g.
  2. 25,000 ÷ 500 = 50.

Answer: 50 bags.

Example 6: Cost

Question: Tomatoes cost $18 per kg. How much do 2.5 kg cost? And if 1.5 kg of cheese costs $30, what is the price per kg?

  1. 2.5 × 18 = 45, so $45.
  2. 30 ÷ 1.5 = 20, so $20 per kg.

Answer: $45; $20 per kg.

Common mistakes

  • Multiplying by 100 instead of 1,000. There are 1,000 g in a kilogram.
  • Writing 5 kg 60 g as 5.6 kg. 60 g is 0.06 kg, so it is 5.06 kg.
  • Adding grams to kilograms without converting first.
  • Forgetting to zero the scale (or to subtract the mass of the container).

Practice questions

Try these yourself first, then open each answer to check your working.

1. Convert:
(a) 4.3 kg to g
(b) 650 g to kg
(c) 2,005 g to kg.

Show answer

(a) 4,300 g
(b) 0.65 kg
(c) 2.005 kg.

2. Write 7 kg 80 g in grams.

Show answer

7,080 g.

3. Put in order, lightest first: 1.2 kg, 950 g, 1,025 g, 1 kg.

Show answer

950 g, 1 kg, 1,025 g, 1.2 kg.

4. A biscuit packet has a mass of 250 g. What is the mass of 12 packets, in kg?

Show answer

3,000 g = 3 kg.

5. Three parcels of 275 g each are put on a scale that can hold 1 kg. How much more can be added?

Show answer

1,000 − 825 = 175 g.

6. 3.6 kg of beef is cut into 8 equal pieces. What is the mass of each piece in grams?

Show answer

3,600 ÷ 8 = 450 g.

7. Rice costs $3.50 per kg. What do 12 kg cost?

Show answer

12 × 3.50 = $42.

8. Which unit would you use for
(a) a mango
(b) a bus
(c) a vitamin tablet?

Show answer

(a) grams
(b) tonnes
(c) milligrams.

Quick check

1. How many grams are in 1 kg?

Show answer

1,000.

2. Does your mass change on the Moon?

Show answer

No – your mass stays the same; your weight is less.

3. Is 0.5 kg more or less than 450 g?

Show answer

More (500 g).

Next: Time: 12- and 24-Hour Clocks, Converting Units and Working Out Durations

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.5 Measurement, Topic 1.5.5 Mass and Weight – Learning Outcomes 1.5.5.1 (measuring mass and weight in kilograms and grams), 1.5.5.2 (converting between grams and kilograms) and 1.5.5.3 (solving problems involving mass and weight).

Attributions to media used in this post:

Balance scale IMGP9755.jpg – Nikodem Nijaki – CC BY-SA 3.0 (via Wikimedia Commons)

Medals weighed in digital scale.jpg – Kpubkalanami – CC BY-SA 4.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Bar Graphs, Mean, Median and Mode: How to Draw, Read and Average Data

In Tally Charts, Pictographs and Block Graphs you organised data and found the mode. Now you will draw bar graphs with a sensible scale, read information from them, and describe a set of data with three kinds of average: the mode, the median and the mean. Averages are used everywhere: a cricketer’s batting average, the average rainfall in a month, or the typical price of a house.

Drawing a bar graph

  1. Draw two axes with a ruler. Put the categories (days, colours, sports…) along the horizontal axis and the frequency (how many) up the vertical axis.
  2. Choose a scale that fits the biggest value and goes up in equal steps – for example 1 square = 2, 5 or 10. Label the scale starting at 0.
  3. Draw bars of equal width with equal gaps between them. Each bar’s height is its frequency.
  4. Label both axes and give the graph a title.
Bar graph of drinks sold at the school tuck shop: Monday 35, Tuesday 20, Wednesday 45, Thursday 30, Friday 50.01020304050MonTueWedThuFriDayDrinks soldDrinks sold at the school tuck shop
Figure 1 – A bar graph with a scale of 10 drinks per grid line. Values between grid lines (35, 45) are read halfway.

Reading the graph: the most drinks were sold on Friday (50) and the fewest on Tuesday (20) – a difference of 30. Altogether 35 + 20 + 45 + 30 + 50 = 180 drinks were sold, a mean of 180 ÷ 5 = 36 per day.

Mode, median and mean

  • The mode is the value that occurs most often. There can be more than one mode, or none.
  • The median is the middle value when the data are put in order. With an even number of values, it is halfway between the two middle values.
  • The mean is the total of all the values divided by how many values there are. It is what each value would be if the total were shared out equally.

TRY ITMean, median and mode calculator

Type a set of whole numbers. The bar graph shows how often each value appears, and the mean, median and mode are worked out step by step.

Bar graph of the data

Worked examples

Example 1: All three averages

Question: Find the mode, median and mean of 4, 7, 3, 7, 9, 2, 7, 5.

  1. In order: 2, 3, 4, 5, 7, 7, 7, 9 (8 values).
  2. Mode: 7 appears three times, so the mode is 7.
  3. Median: the middle values are the 4th and 5th, 5 and 7, so the median is (5 + 7) ÷ 2 = 6.
  4. Mean: total = 44, and 44 ÷ 8 = 512 (5.5).

Answer: Mode 7, median 6, mean 512.

Example 2: Median of an even set

Question: Find the median of 12, 15, 11, 18, 14, 16.

  1. In order: 11, 12, 14, 15, 16, 18.
  2. The two middle values are 14 and 15.
  3. Halfway between them: (14 + 15) ÷ 2 = 14.5.

Answer: 14.5.

Example 3: A missing value

Question: The mean of five test marks is 8. Four of them are 6, 9, 7 and 10. Find the fifth.

  1. Mean 8 for 5 marks means the total is 5 × 8 = 40.
  2. The four known marks total 6 + 9 + 7 + 10 = 32.
  3. 40 − 32 = 8.

Answer: The fifth mark is 8.

Example 4: Which average?

Question: Five friends earn $20, $22, $21, $23 and $95 for a job. Which average best describes a typical amount?

  1. Mean = 181 ÷ 5 = $36.20 – pulled up by the one big value of $95.
  2. Median = $22 (the middle value).

Answer: The median ($22) is more typical; one unusual value distorts the mean.

Which average to use? The mode suits categories (favourite colour) or the most common size (a shop ordering shoes). The median is good when there are a few very large or very small values. The mean uses every value and is best when the data have no extreme values.

Common mistakes

  • Finding the median without ordering the data first.
  • Giving the frequency instead of the value as the mode: if 7 appears 3 times, the mode is 7, not 3.
  • Dividing by the wrong number for the mean – count the values carefully.
  • Bars of different widths, or a scale with uneven steps or not starting at 0.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Find the mean, median and mode of 3, 8, 5, 6, 8.

Show answer

Mean 30 ÷ 5 = 6; median 6 (order 3, 5, 6, 8, 8); mode 8.

2. Find the mean and median of 10, 4, 7, 9.

Show answer

Mean 30 ÷ 4 = 7.5; median (7 + 9) ÷ 2 = 8.

3. The mean of four numbers is 15. Three of them are 12, 18 and 14. Find the fourth.

Show answer

4 × 15 = 60; 60 − 44 = 16.

4. The mean age of 6 children is 24 months. A 31-month-old joins them. What is the new mean?

Show answer

Total 144 + 31 = 175; 175 ÷ 7 = 25 months.

5. Goals in 9 matches: 2, 0, 1, 3, 1, 0, 4, 1, 2. Find the mode, median and mean.

Show answer

Mode 1; median 1 (order 0, 0, 1, 1, 1, 2, 2, 3, 4); mean 14 ÷ 9 = 159 ≈ 1.6.

6. On a bar graph, one square represents 5 people. How many people do bars of 8 squares and 13 squares show?

Show answer

40 and 65.

Quick check

1. Which average is the middle value?

Show answer

The median.

2. Can a set of data have two modes?

Show answer

Yes.

3. Should the bars of a bar graph have equal widths?

Show answer

Yes, with equal gaps.

Next: Mass and Weight: Grams, Kilograms and Converting Units

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.3 Statistics and Probability, Topic 1.3.2 Statistics – Learning Outcomes 1.3.2.1 (constructing bar graphs with suitable scales), 1.3.2.2 (interpreting bar graphs) and 1.3.2.3 (solving problems involving the mode, median and mean).

© 2026 Vedesh Kungebeharry. All rights reserved.

Quadrilaterals: Angle Sum, Properties and Types (Square, Rectangle, Rhombus, Parallelogram, Trapezium, Kite)

A quadrilateral is any polygon with four straight sides, four corners (vertices) and four angles. Look around: doors, tiles, books, kites, ramps and roof panels are all quadrilaterals. Some are special and have their own names – square, rectangle, rhombus, parallelogram, trapezium and kite. In this lesson you will find the angle sum of a quadrilateral, learn the properties of each special type, and use them to solve problems and draw shapes accurately. It uses ideas from Points and Lines and Triangles.

The angles of a quadrilateral add up to 360°

Draw any quadrilateral and join two opposite corners with a straight line (a diagonal). This splits it into two triangles. Each triangle has angles adding to 180°, so the four angles of the quadrilateral add to 2 × 180° = 360°. You can also tear off the four corners: they fit together round a point.

Special quadrilaterals

ShapeSidesAnglesDiagonals
Squareall 4 equal; opposite sides parallelall 90°equal, bisect each other at 90°
Rectangleopposite sides equal and parallelall 90°equal, bisect each other
Rhombusall 4 equal; opposite sides parallelopposite angles equalbisect each other at 90°
Parallelogramopposite sides equal and parallelopposite angles equal; neighbouring angles add to 180°bisect each other
Trapeziumexactly one pair of parallel sides (in most UK and Caribbean books; some books allow two pairs)angles between each parallel pair and a slanted side add to 180°–
Kitetwo pairs of equal neighbouring sidesone pair of opposite angles equalcross at 90°; one is cut in half by the other
Properties of special quadrilaterals. A square is a special rectangle and a special rhombus; rectangles and rhombuses are special parallelograms.
Coloured plastic pattern blocks: a yellow hexagon, a blue rhombus, a thin tan rhombus, a red trapezium, an orange square and a green triangle
Figure 1 – Pattern blocks. The square, the two rhombuses and the trapezium are all quadrilaterals. Image: Annielogue, CC BY-SA 3.0, via Wikimedia Commons.

Drawing quadrilaterals

Use a ruler and protractor, as for triangles. For example, to draw a parallelogram ABCD with AB = 6 cm, AD = 4 cm and ∠A = 60°:

  1. Draw AB = 6 cm.
  2. At A, draw a line at 60° and mark D on it 4 cm from A.
  3. Opposite angles are equal and neighbouring angles add to 180°, so at B draw a line at 120° to BA, and mark C on it 4 cm from B.
  4. Join D to C. Check that DC measures 6 cm and is parallel to AB.

A 6 cm by 4 cm rectangle is easier: draw a 6 cm base, draw 4 cm sides at right angles at each end, and join the tops. Each diagonal should measure about 7.2 cm.

Worked examples

Example 1: The missing angle

Question: A quadrilateral has angles of 85°, 110° and 70°. Find the fourth angle.

  1. The angles add to 360°.
  2. 360 − 85 − 110 − 70 = 95.

Answer: 95°.

Example 2: Parallelogram

Question: One angle of a parallelogram is 65°. Find the other three.

  1. Neighbouring angles add to 180°: 180 − 65 = 115°.
  2. Opposite angles are equal.

Answer: 115°, 65° and 115°.

Example 3: Kite

Question: A kite has angles of 120° and 60° between its pairs of equal sides. The other two angles are equal. Find them.

  1. Together they are 360 − 120 − 60 = 180°.
  2. They are equal, so each is 180 ÷ 2 = 90°.

Answer: 90° each.

Example 4: Trapezium

Question: In trapezium PQRS, PQ is parallel to SR. ∠P = 70° and ∠Q = 115°. Find ∠S and ∠R.

  1. P and S lie between the parallel sides on the same slanted side, so ∠S = 180 − 70 = 110°.
  2. Likewise ∠R = 180 − 115 = 65°.
  3. Check: 70 + 115 + 65 + 110 = 360 ✓.

Answer: ∠S = 110°, ∠R = 65°.

Example 5: Using algebra

Question: A quadrilateral has angles 90°, 90°, x and 2x. Find x.

  1. 90 + 90 + x + 2x = 360, so 3x = 180.
  2. x = 60.

Answer: x = 60°; the angles are 90°, 90°, 60° and 120°.

Common mistakes

  • Using 180° instead of 360° for a quadrilateral.
  • Thinking a square is not a rectangle. A square has every property of a rectangle (and more), so it is a special rectangle.
  • Mixing up a rhombus and a kite. A rhombus has all four sides equal; a kite has two pairs of equal neighbouring sides.
  • Assuming the diagonals of a rhombus are equal. They are perpendicular, but only equal if it is a square.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Three angles of a quadrilateral are 100°, 80° and 75°. Find the fourth.

Show answer

105°.

2. One angle of a rhombus is 48°. Find the other three.

Show answer

132°, 48°, 132°.

3. Name the quadrilateral: all sides equal, no right angles.

Show answer

A rhombus.

4. All four angles of a quadrilateral are equal. What size is each, and what could the shape be?

Show answer

90° each; a rectangle or a square.

5. True or false:
(a) every square is a rhombus
(b) every rhombus is a square
(c) a trapezium can have a right angle.

Show answer

(a) True
(b) False
(c) True – for example a right trapezium.

6. A quadrilateral has two angles of 40° and two other equal angles, y. Find y.

Show answer

y = (360 − 80) ÷ 2 = 140°.

7. The angles of a quadrilateral are in the ratio 1 : 2 : 3 : 4, that is x, 2x, 3x and 4x. Find them.

Show answer

10x = 360, so x = 36: 36°, 72°, 108°, 144°.

Quick check

1. What do the angles of a quadrilateral add up to?

Show answer

360°.

2. Which quadrilateral has exactly one pair of parallel sides?

Show answer

A trapezium.

3. What do neighbouring angles of a parallelogram add up to?

Show answer

180°.

Next: Bar Graphs, Mean, Median and Mode

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.4 Geometry, Topic 1.4.5 Quadrilaterals – Learning Outcomes 1.4.5.1 (the interior angles of a quadrilateral add to 360°), 1.4.5.2 (classifying quadrilaterals by their properties), 1.4.5.3 (drawing quadrilaterals from given sides and angles) and 1.4.5.4 (solving problems involving quadrilaterals).

Attributions to media used in this post:

Plastic pattern blocks.JPG – Annielogue – CC BY-SA 3.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Triangles: Angle Sum, Types of Triangles and How to Construct Them

The triangle is the simplest polygon – just three straight sides – yet it is one of the most useful shapes in the world. Triangles are rigid: push on a triangle made of three sticks and it keeps its shape, while a square frame would fold flat. That is why bridges, roofs and bicycle frames are full of triangles. In this lesson you will discover the angle sum of a triangle, the link between angles and sides, the six ways to classify triangles, and how to construct a triangle accurately.

An old steel truss bridge whose sides are made of diagonal and vertical beams forming triangles
Figure 1 – A truss bridge. The diagonal beams split each section into triangles, which keep the bridge rigid. Image: Sesamehoneytart, CC BY-SA 4.0, via Wikimedia Commons.

The angles of a triangle add up to 180°

Draw any triangle on paper and cut it out. Tear off the three corners and place them side by side with their points touching. They always fit together to make a straight line – so they add up to 180°. This is true for every triangle, whatever its size or shape.

Angles and sides

In any triangle, the longest side is opposite the largest angle, and the shortest side is opposite the smallest angle. If two angles are equal, the sides opposite them are equal. (Side a is usually the side opposite angle A, and so on.)

Types of triangle

By sidesMeaningBy anglesMeaning
Equilateralall 3 sides equal (and all angles 60°)Acute-angledall 3 angles less than 90°
Isosceles2 sides equal (and the 2 angles opposite them equal)Right-angledone angle exactly 90°
Scaleneno sides equal (and no angles equal)Obtuse-angledone angle more than 90°
Every triangle has one name from each list, for example “a right-angled isosceles triangle”. Equal sides are shown on diagrams with matching tick marks.

TRY ITTriangle explorer

Set two angles with the sliders. The third angle is worked out for you, the triangle is drawn to shape, and it is classified by its angles and by its sides.

Triangle

Constructing triangles

You need a sharp pencil, a ruler and a protractor.

(a) Two sides and the included angle (the angle between them) – for example AB = 6 cm, AC = 5 cm and ∠A = 50°:

  1. Draw AB = 6 cm with a ruler.
  2. At A, measure and mark 50° with the protractor, and draw a long faint line from A through the mark.
  3. Measure 5 cm along this line from A and mark C.
  4. Join C to B. Measure BC: it should be about 4.7 cm.

(b) One side and two angles – for example PQ = 7 cm, ∠P = 40° and ∠Q = 60°:

  1. Draw PQ = 7 cm.
  2. At P, draw a long line at 40° to PQ.
  3. At Q, draw a long line at 60° to QP, on the same side.
  4. The lines cross at R. Check: ∠R should measure 180 − 40 − 60 = 80°, and PR ≈ 6.2 cm, QR ≈ 4.6 cm.

Worked examples

Example 1: The missing angle

Question: A triangle has angles of 47° and 68°. Find the third angle.

  1. The angles add to 180°.
  2. 180 − 47 − 68 = 65.

Answer: 65°.

Example 2: Isosceles triangle

Question: An isosceles triangle has a top angle of 40°. Find the two equal base angles.

  1. The base angles together are 180 − 40 = 140°.
  2. They are equal, so each is 140 ÷ 2 = 70°.

Answer: 70° and 70°.

Example 3: Right-angled triangle

Question: A right-angled triangle has one angle of 32°. Find the other angle and classify the triangle.

  1. 180 − 90 − 32 = 58°.
  2. The angles 90°, 32°, 58° are all different, so the sides are all different.

Answer: 58°; a right-angled scalene triangle.

Example 4: Longest side

Question: In triangle ABC, ∠A = 70°, ∠B = 50° and ∠C = 60°. Which side is longest?

  1. The largest angle is ∠A = 70°.
  2. The longest side is opposite A, which is BC (side a).

Answer: BC.

Common mistakes

  • Forgetting the right angle when finding a missing angle in a right-angled triangle.
  • Thinking an isosceles triangle is always “pointing up”. It is isosceles if any two sides are equal.
  • Drawing the angle at the wrong end of the line in a construction – read the question carefully.
  • Rubbing out construction lines. Leave them faint but visible; they show your method.

Practice questions

Try these yourself first, then open each answer to check your working.

1. A right-angled triangle has an angle of 25°. Find the third angle.

Show answer

65°.

2. An isosceles triangle has two base angles of 52°. Find the top angle.

Show answer

180 − 104 = 76°.

3. An isosceles triangle has a top angle of 110°. Find each base angle. Is it acute or obtuse-angled?

Show answer

35° each; obtuse-angled.

4. The angles of a triangle are 2x, 3x and 30°. Find x and the angles.

Show answer

5x = 150, so x = 30; the angles are 60°, 90° and 30°.

5. Can a triangle have angles of 25°, 120° and 40°? Explain.

Show answer

No – they add to 185°, not 180°. With 25° and 120°, the third must be 35°.

6. Can a triangle have two obtuse angles?

Show answer

No – two angles over 90° would already add to more than 180°.

7. Construct triangle XYZ with XY = 8 cm, ∠X = 45° and ∠Y = 45°. What type of triangle is it?

Show answer

∠Z = 90°, and the two 45° angles are equal, so it is a right-angled isosceles triangle (XZ = YZ ≈ 5.7 cm).

Quick check

1. What do the angles in a triangle add up to?

Show answer

180°.

2. What are the angles of an equilateral triangle?

Show answer

60°, 60°, 60°.

3. Where is the shortest side of a triangle?

Show answer

Opposite the smallest angle.

Next: Quadrilaterals: Angle Sum, Properties and Types

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.4 Geometry, Topic 1.4.4 Triangles – Learning Outcomes 1.4.4.1 (the interior angles of a triangle add to 180°), 1.4.4.2 (the link between an angle and the length of the opposite side), 1.4.4.3 (classifying triangles as acute, right or obtuse angled, isosceles, equilateral or scalene), 1.4.4.4 (drawing triangles from two sides and the included angle, or one side and two angles) and 1.4.4.5 (solving problems involving triangles).

Attributions to media used in this post:

Chapman Creek Pratt Truss Bridge.jpg – Sesamehoneytart – CC BY-SA 4.0 (via Wikimedia Commons)

© 2026 Vedesh Kungebeharry. All rights reserved.

How to Measure and Draw Angles with a Protractor (Including Reflex Angles)

A protractor is a see-through semicircle (or full circle) marked in degrees. It lets you measure an angle accurately and draw an angle of any size. It is easy to read the wrong scale, so this lesson shows the steps carefully, then uses angle facts to solve problems without measuring. Make sure you know the types of angle from Angles as Turns – they help you check your readings.

Line drawing of a semicircular protractor measuring an angle of 120 degrees
Figure 1 – A protractor measuring an angle of 120°. Notice the two scales running in opposite directions. Image: Pearson Scott Foresman, Public domain, via Wikimedia Commons.

Measuring an angle

  1. Estimate first: is the angle acute (less than 90°) or obtuse (more than 90°)?
  2. Put the protractor’s centre point (the small cross or hole on the base line) exactly on the vertex.
  3. Turn the protractor so that its base line (0° line) lies along one arm.
  4. Follow that arm out to the scale and find the 0. Use the scale that starts at 0 on that arm – inner or outer.
  5. Count round on the same scale to where the other arm crosses it, and read the number.
  6. Check against your estimate. If you estimated acute but read 130°, you used the wrong scale – the answer is 180 − 130 = 50°.

If the arms are too short to reach the scale, extend them with a ruler first.

Measuring a reflex angle

A semicircular protractor only goes to 180°. To measure a reflex angle, measure the smaller angle on the other side and subtract it from 360°. For example, if the smaller angle is 110°, the reflex angle is 360 − 110 = 250°.

Drawing an angle

  1. Draw one arm with a ruler and mark the vertex at one end.
  2. Place the centre of the protractor on the vertex with the base line along the arm.
  3. Find the 0 on that arm, count round on that scale to the angle you want, and make a small dot.
  4. Remove the protractor and join the vertex to the dot with a ruler. Label the angle.
  5. For a reflex angle such as 300°, draw 360 − 300 = 60° and mark the outside (reflex) angle.

TRY ITVirtual protractor

Drag the slider (or use the arrow keys) to open the angle. The protractor shows both scales, names the type of angle and explains how to read it. Then try the quiz.

Protractor

Angle facts for solving problems

  • Angles on a straight line add up to 180°.
  • Angles at a point (all the way round) add up to 360°.
  • When two straight lines cross, the vertically opposite angles are equal.
  • Two angles that make a right angle add up to 90°.

Worked examples

Example 1: Which scale?

Question: The base arm of an angle lies on the 0 of the inner scale. The other arm crosses the outer scale at 130° and the inner scale at 50°. The angle is clearly acute. What is it?

  1. Read the scale that starts at 0 on the base arm: the inner scale.
  2. Inner reading = 50°. It is acute, which matches the estimate.

Answer: 50°.

Example 2: Angles on a straight line

Question: Two angles lie side by side on a straight line. One is 65°. Find the other.

  1. Angles on a straight line add to 180°.
  2. 180 − 65 = 115.

Answer: 115°.

Example 3: Three angles on a line

Question: Angles of 40°, x and 75° lie on a straight line. Find x.

  1. 40 + x + 75 = 180.
  2. x = 180 − 40 − 75 = 65.

Answer: x = 65°.

Example 4: Angles at a point

Question: Four angles meet at a point: 120°, 95°, 80° and y. Find y.

  1. Angles at a point add to 360°.
  2. y = 360 − 120 − 95 − 80 = 65.

Answer: y = 65°.

Example 5: Crossing lines

Question: Two straight lines cross. One of the four angles is 50°. Find the other three.

  1. The angle next to it on the straight line is 180 − 50 = 130°.
  2. Vertically opposite angles are equal, so the angles are 50°, 130°, 50°, 130°.

Answer: 130°, 50° and 130°.

Common mistakes

  • Reading the wrong scale. Always start from 0 on the arm that lies along the base line – and compare with your estimate.
  • Putting the edge of the protractor, not its centre mark, on the vertex.
  • Not extending short arms, so the reading is a guess.
  • Adding to 360° on a straight line (it is 180°) or to 180° at a point (it is 360°).

Practice questions

Try these yourself first, then open each answer to check your working.

1. You measure an angle that looks obtuse and read 40°. What has gone wrong, and what is the angle?

Show answer

You used the wrong scale; the angle is 180 − 40 = 140°.

2. Describe how to draw an angle of 72°.

Show answer

Draw an arm, put the protractor centre on the vertex with the base line on the arm, count from 0 to 72 on that scale, mark a dot, join it to the vertex.

3. The smaller angle between two arms is 140°. What is the reflex angle?

Show answer

360 − 140 = 220°.

4. One angle on a straight line is 37°. Find the other.

Show answer

143°.

5. In a right-angled corner, a line splits the 90° into two angles. One is 54°. Find the other.

Show answer

The two parts add to 90°, so 90 − 54 = 36°.

6. Three equal angles of 100° and one angle z meet at a point. Find z.

Show answer

360 − 300 = 60°.

7. A right angle and three equal angles meet at a point. Find each of the equal angles.

Show answer

(360 − 90) ÷ 3 = 90°.

8. Two angles of 35° and an angle w lie on a straight line. Find w.

Show answer

180 − 70 = 110°.

Quick check

1. Where does the centre of the protractor go?

Show answer

On the vertex of the angle.

2. What do angles at a point add up to?

Show answer

360°.

3. How do you measure a 290° angle with a 180° protractor?

Show answer

Measure the other side (70°) and subtract from 360°.

Next: Triangles: Angle Sum, Types of Triangles and How to Construct Them

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.4 Geometry, Topic 1.4.3 Angles – Learning Outcomes 1.4.3.5 (measuring angles from 0° to 360° with a protractor), 1.4.3.6 (drawing angles of different sizes) and 1.4.3.7 (solving problems involving angles).

Attributions to media used in this post:

Protractor 2 (PSF).png – Pearson Scott Foresman – Public domain (via Wikimedia Commons)

© 2026 Vedesh Kungebeharry. All rights reserved.

Angles as Turns: Degrees, Full, Half and Quarter Turns, and Types of Angles

Open a door, turn a key, or watch the hands of a clock move: each of these is a turn. An angle measures the amount of turn between two lines that meet at a point. In this lesson you will learn how angles are measured in degrees, how whole, half and quarter turns relate to degrees, and how to name the five main types of angle. In the next lesson you will measure and draw them with a protractor.

What is an angle?

An angle is made by two arms (rays or line segments) that meet at a point called the vertex. The size of the angle is how far one arm has turned away from the other – it does not depend on how long the arms are drawn. Angles can be dynamic (still turning, like a swinging door) or fixed (like the corner of a table).

An angle with vertex B and arms through A and C is written ∠ABC (or ABC with a hat, or just ∠B). The vertex letter is always in the middle.

Comparing angles without measuring

You can compare two angles directly: place one on top of the other with the vertices and one arm matching. The angle whose second arm is further out is the bigger angle. Try it with two strips of card joined by a paper fastener, or by tracing one angle on thin paper. This works even before you have any units.

Turns and degrees

Angles are measured in degrees (°). A full turn – all the way round to where you started – is 360°. (The ancient Babylonians chose 360, probably because it divides exactly by so many numbers.)

TurnDegreesExample
Full turn360°The minute hand going from 12 all the way round to 12 (one hour).
Three-quarter turn270°Facing North, turning clockwise to face West.
Half turn180°Turning round to face the opposite way.
Quarter turn90°The minute hand moving from 12 to 3 (15 minutes).

Types of angle

Five angles drawn side by side: acute 40 degrees, right angle with a square corner mark, obtuse 135 degrees, straight 180 degrees, and reflex 250 degrees.Acute (less than 90°)Right (exactly 90°)Obtuse (90° to 180°)Straight (180°)Reflex (180° to 360°)
TypeSizeExample
Acutemore than 0° and less than 90°the tip of a slice of pizza
Rightexactly 90°the corner of a page
Obtusemore than 90° and less than 180°a reclining chair
Straightexactly 180°a straight line
Reflexmore than 180° and less than 360°the outside of a pizza slice’s corner

Worked examples

Example 1: Turns to degrees

Question: How many degrees are in
(a) a half turn
(b) a quarter turn
(c) three-quarters of a turn
(d) one third of a turn?

  1. (a) 360 ÷ 2 = 180°.
  2. (b) 360 ÷ 4 = 90°.
  3. (c) 3 × 90 = 270°.
  4. (d) 360 ÷ 3 = 120°.

Answer: 180°, 90°, 270°, 120°.

Example 2: Compass turns

Question: Facing North, how many degrees do you turn clockwise to face
(a) East
(b) South-West?

  1. The compass points are 90° apart: N → E → S → W.
  2. (a) N to E is a quarter turn: 90°.
  3. (b) N to S is 180°, and South-West is halfway from S to W, another 45°: 180 + 45 = 225°.

Answer: 90° and 225°.

Example 3: Clock hands

Question: What angle do the hands of a clock make at 4 o’clock?

  1. The 12 hour marks split 360° into 12 equal parts: 360 ÷ 12 = 30° per hour mark.
  2. At 4 o’clock the hands are 4 marks apart: 4 × 30 = 120°.

Answer: 120° (obtuse). The angle the other way round is 360 − 120 = 240° (reflex).

Common mistakes

  • Judging an angle by the length of its arms. Longer arms do not make a bigger angle.
  • Calling 90° acute or obtuse. 90° is exactly a right angle; acute is less, obtuse is more.
  • Forgetting reflex angles. Every pair of arms makes two angles: one is 360° minus the other.
  • Putting the vertex letter at the end when naming: ∠ABC has its vertex at B.

Practice questions

Try these yourself first, then open each answer to check your working.

1. An angle is drawn with very long arms, and another with very short arms. Can you tell which is bigger by the arm length?

Show answer

No. Angle size is the amount of turn, not the arm length.

2. Change to degrees:
(a) 12 turn
(b) 34 turn
(c) 2 full turns
(d) 18 turn.

Show answer

(a) 180°
(b) 270°
(c) 720°
(d) 45°.

3. Name the type of each angle: 35°, 90°, 145°, 180°, 250°.

Show answer

Acute, right, obtuse, straight, reflex.

4. How many right angles make a straight angle? How many 30° angles make a straight angle?

Show answer

2 right angles; 6 angles of 30°.

5. What is the smaller angle between the clock hands at
(a) 2 o’clock
(b) 7 o’clock?

Show answer

(a) 2 × 30 = 60°
(b) 7 × 30 = 210°, so the smaller angle is 360 − 210 = 150°.

6. Classify: 89°, 91°, 179°, 181°, 300°.

Show answer

Acute, obtuse, obtuse, reflex, reflex.

Quick check

1. How many degrees in a full turn?

Show answer

360°.

2. Which letter is the vertex in ∠PQR?

Show answer

Q.

3. Is 200° obtuse or reflex?

Show answer

Reflex.

Next: How to Measure and Draw Angles with a Protractor

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.4 Geometry, Topic 1.4.3 Angles – Learning Outcomes 1.4.3.1 (an angle as a measure of turn), 1.4.3.2 (comparing and ordering angles directly, without units), 1.4.3.3 (whole, half and quarter turns in degrees) and 1.4.3.4 (classifying angles as acute, right, obtuse, straight or reflex).

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Points, Lines, Line Segments and Rays: Parallel and Perpendicular Lines

Geometry is built from a few simple ideas: points, lines, line segments and rays. Once you know exactly what each word means, you can describe any shape precisely – from a football pitch to a bridge. In this lesson you will also learn to spot parallel and perpendicular lines, which you will use again in angles, triangles and quadrilaterals.

Points, lines, segments and rays

  • A point marks an exact position. It has no length, width or thickness. We draw it as a dot and name it with a capital letter, such as point A.
  • A straight line goes on forever in both directions. We draw arrows at both ends and name it by two points on it, such as line PQ (written PQ with arrows in some books).
  • A line segment is the part of a line between two end points. It has a fixed length that you can measure. Segment RS has end points R and S. The sides of a triangle are line segments.
  • A ray starts at one point and goes on forever in one direction, like a beam of light from a torch. Ray TU starts at T and passes through U – the starting point is always named first.
Diagram: a point A; line PQ with arrows at both ends; line segment RS with two end points; ray TU starting at T with one arrow; two parallel lines marked with matching arrowheads; and two perpendicular lines meeting at a right angle marked with a small square.Point AALine PQPQLine segment RSRSRay TUTUParallel lines (AB ∥ CD)Perpendicular lines (EF ⊥ GH)

Through any two points you can draw exactly one straight line. With 4 points (no three in a line) you can join 6 different line segments, and with 5 points you can join 10.

Parallel and perpendicular lines

  • Parallel lines are always the same distance apart and never meet, however far they are extended – like railway tracks, the lines on writing paper, or the opposite edges of a ruler. On diagrams they are marked with matching arrowheads. The symbol is ∥: AB ∥ CD means “AB is parallel to CD”.
  • Perpendicular lines meet (intersect) at a right angle (90°) – like the corner of a page, or a flagpole and level ground. The right angle is marked with a small square. The symbol is ⊥: EF ⊥ GH.
  • Intersecting lines cross at a point. Perpendicular lines are a special kind of intersecting lines.
Three pairs of lines labelled perpendicular lines, parallel lines and intersecting lines
Figure 1 – Perpendicular, parallel and intersecting lines. Image: Brigban, CC0, via Wikimedia Commons.

How to check: to test for a right angle, place the corner of a set square or a folded piece of paper in the angle. To test for parallel lines, measure the gap between them in two places far apart – if the gaps are equal, the lines are parallel.

Worked examples

Example 1: Name it

Question: Describe each:
(a) the edge of a desk
(b) the beam from a lighthouse
(c) a star’s position on a map
(d) the equator imagined as going on forever in a straight line.

  1. (a) It has two ends and a length: a line segment.
  2. (b) It starts at the lighthouse and goes on in one direction: a ray.
  3. (c) An exact position: a point.
  4. (d) Endless in both directions: a line.

Answer: Segment, ray, point, line.

Example 2: In a rectangle

Question: In rectangle ABCD (corners in order), which sides are parallel and which are perpendicular?

  1. Opposite sides of a rectangle never meet: AB ∥ DC and AD ∥ BC.
  2. Neighbouring sides meet at right angles: AB ⊥ BC, BC ⊥ CD, CD ⊥ DA, DA ⊥ AB.

Answer: Two pairs of parallel sides; four pairs of perpendicular sides.

Example 3: Counting segments

Question: How many line segments can be drawn joining 4 points, no three of which are in a straight line?

  1. Each point can be joined to the other 3: 4 × 3 = 12.
  2. But that counts each segment twice (AB and BA), so divide by 2.

Answer: 12 ÷ 2 = 6 segments.

Common mistakes

  • Calling a line segment a line. A line has no ends; if you can measure it, it is a segment.
  • Naming a ray backwards. Ray TU starts at T; ray UT starts at U and points the other way.
  • Thinking lines that do not touch on the page are parallel. They must stay the same distance apart; extend them to check.
  • Thinking perpendicular means vertical. Perpendicular lines can point in any direction – they just meet at 90°.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Which has a fixed length: a line, a ray or a line segment?

Show answer

A line segment.

2. Give two examples of parallel lines and two of perpendicular lines in your classroom.

Show answer

For example: parallel – the top and bottom edges of the board, opposite edges of a door; perpendicular – a wall meeting the floor, the corner of a book.

3. How many straight lines can be drawn through two points? Through one point?

Show answer

Exactly one through two points; infinitely many through one point.

4. How many line segments join 3 points that are not in a straight line?

Show answer

3 (they make a triangle).

5. Write “line XY is perpendicular to line YZ” using a symbol.

Show answer

XY ⊥ YZ.

6. Look at the capital letters E, H, L, T and Z. Which contain perpendicular segments, and which contain parallel segments?

Show answer

Perpendicular: E, H, L, T. Parallel: E (three horizontal strokes), H (two vertical strokes) and Z (top and bottom strokes).

Quick check

1. What symbol means “is parallel to”?

Show answer

∥

2. At what angle do perpendicular lines meet?

Show answer

90° (a right angle).

3. How many end points does a ray have?

Show answer

One.

Next: Angles as Turns: Degrees and Types of Angles

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.4 Geometry, Topic 1.4.2 Points and Lines – Learning Outcomes 1.4.2.1 (explaining point, straight line, line segment and ray) and 1.4.2.2 (telling parallel and perpendicular lines apart).

Attributions to media used in this post:

Different lines.jpg – Brigban – CC0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Number Patterns and Sequences: Finding the nth Term (with Matchstick Patterns)

Lay matchsticks out to make a row of squares. One square takes 4 matchsticks, two squares take 7, three take 10… How many would you need for 50 squares? You could build it and count, but there is a much faster way: spot the pattern, write it as an algebraic expression, and substitute 50. This lesson shows you how to find the rule for the nth term of a sequence and use it.

Two students at a wooden desk arranging toothpicks into square patterns
Figure 1 – Students building patterns with toothpicks. Counting how many sticks each new shape adds is the key to finding the rule. Image: Blue Plover, CC BY-SA 3.0, via Wikimedia Commons.

Sequences and terms

A sequence is a list of numbers that follows a rule. Each number is a term. The term number (or position) is usually called n: the 1st term has n = 1, the 2nd has n = 2, and so on.

In the sequence 4, 7, 10, 13, … the terms go up by 3 each time. This constant difference is called the common difference. Sequences with a common difference are called linear sequences.

Finding the rule for the nth term

  1. Find the common difference, d. This is the number that multiplies n.
  2. Work out what you must add or subtract to get the first term. A quick way: the number to add is first term − d (the “zeroth term”).
  3. Write the rule: nth term = dn + (first term − d).
  4. Check it with the 2nd and 3rd terms.

For 4, 7, 10, 13: d = 3, and 4 − 3 = 1, so the nth term is 3n + 1. Check: the 3rd term is 3 × 3 + 1 = 10 ✓. For 50 squares you need 3 × 50 + 1 = 151 matchsticks. The rule makes sense: each square adds 3 sticks, plus 1 extra stick to close the first square.

TRY ITMatchstick sequence explorer

Pick a pattern and move the slider. Count the matchsticks, look at how many each new shape adds, and use the rule to predict any term.

Matchstick pattern
Term number and number of matchsticks

Worked examples

Example 1: An increasing sequence

Question: Find the nth term of 5, 8, 11, 14, … and the 20th term.

  1. Common difference: 8 − 5 = 3, so the rule starts 3n.
  2. First term − d = 5 − 3 = 2.
  3. nth term = 3n + 2. Check: 3 × 2 + 2 = 8 ✓.
  4. 20th term = 3 × 20 + 2 = 62.

Answer: 3n + 2; the 20th term is 62.

Example 2: A decreasing sequence

Question: Find the nth term of 20, 17, 14, 11, … and the 10th term.

  1. Common difference: 17 − 20 = −3, so the rule starts −3n.
  2. First term − d = 20 − (−3) = 23.
  3. nth term = −3n + 23 (or 23 − 3n). Check: 23 − 3 × 2 = 17 ✓.
  4. 10th term = 23 − 30 = −7.

Answer: 23 − 3n; the 10th term is −7.

Example 3: Which term?

Question: The nth term of a sequence is 4n + 3. Which term is equal to 99?

  1. We need 4n + 3 = 99.
  2. Undo the steps in reverse: 99 − 3 = 96, then 96 ÷ 4 = 24.
  3. Check: 4 × 24 + 3 = 99 ✓.

Answer: The 24th term.

Example 4: From a rule to a sequence

Question: Write the first three terms and the 10th term of the sequence with nth term 2n − 1.

  1. n = 1: 2 − 1 = 1; n = 2: 4 − 1 = 3; n = 3: 6 − 1 = 5.
  2. n = 10: 20 − 1 = 19.

Answer: 1, 3, 5, … (the odd numbers); the 10th term is 19.

Example 5: Triangles of matchsticks

Question: Triangles in a row use 3, 5, 7, … matchsticks. How many are needed for 100 triangles?

  1. d = 2 and 3 − 2 = 1, so the rule is 2n + 1.
  2. n = 100: 2 × 100 + 1 = 201.

Answer: 201 matchsticks.

Not every sequence is linear. The square numbers 1, 4, 9, 16, 25, … have nth term n2, and their differences (3, 5, 7, 9) are not constant.

Common mistakes

  • Writing n + 3 instead of 3n for a sequence that goes up in 3s. The common difference multiplies n.
  • Using the first term as the number added. For 5, 8, 11 the rule is 3n + 2, not 3n + 5.
  • Not checking. Always test your rule on at least two terms.
  • Forgetting the sign for decreasing sequences: the difference is negative.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Write the next two terms and the nth term of 4, 9, 14, 19, …

Show answer

Next: 24, 29. d = 5, 4 − 5 = −1, so 5n − 1.

2. Find the nth term and the 30th term of 10, 12, 14, 16, …

Show answer

2n + 8; 30th term = 68.

3. Find the nth term of 30, 26, 22, 18, … Which is the first negative term?

Show answer

34 − 4n. It is negative when 4n > 34, so first at n = 9 (34 − 36 = −2).

4. Write the first four terms and the 100th term of the sequence 6n − 2.

Show answer

4, 10, 16, 22; the 100th term is 598.

5. Is 200 a term of the sequence 3n + 2? If so, which term?

Show answer

200 − 2 = 198 and 198 ÷ 3 = 66, a whole number, so yes: the 66th term.

6. A row of hexagons uses 6, 11, 16, … matchsticks. How many are needed for 12 hexagons?

Show answer

Rule 5n + 1, so 5 × 12 + 1 = 61.

7. Find the nth term of −5, −2, 1, 4, …

Show answer

d = 3 and −5 − 3 = −8, so 3n − 8.

Quick check

1. What is the common difference of 7, 12, 17, 22?

Show answer

5.

2. What is the 1st term of 4n − 1?

Show answer

3.

3. Is 2, 4, 8, 16 a linear sequence?

Show answer

No – the differences (2, 4, 8) are not constant; each term is doubled.

Next: Points, Lines, Line Segments and Rays: Parallel and Perpendicular Lines

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.6 Algebra, Topic 1.6.2 Expressions – Learning Outcomes 1.6.2.2 (writing an expression for the nth term of a sequence) and 1.6.2.3 (calculating the nth term of a sequence).

Attributions to media used in this post:

Toothpick Puzzles at Discovery Day in Laos.jpg – Blue Plover – CC BY-SA 3.0 (via Wikimedia Commons)

© 2026 Vedesh Kungebeharry. All rights reserved.

Multiplying and Dividing Directed Numbers, and Substituting Them into Expressions

In the previous lesson you added and subtracted positive and negative numbers. Now you will multiply and divide them, and then substitute directed numbers into algebraic expressions – a skill you first met with whole numbers in Introduction to Algebra.

Why does a negative times a negative give a positive?

Look at the pattern. Each answer goes down by 3, so it keeps going below zero:

3 × 2 = 6, 3 × 1 = 3, 3 × 0 = 0, 3 × (−1) = −3, 3 × (−2) = −6.

Now multiply by −3. This time each answer goes up by 3:

−3 × 2 = −6, −3 × 1 = −3, −3 × 0 = 0, −3 × (−1) = 3, −3 × (−2) = 6.

So a negative multiplied by a negative is positive. Division follows the same sign rules, because division undoes multiplication.

The sign rules for × and ÷

SignsAnswerExamples
positive × positivepositive4 × 5 = 20,   20 ÷ 4 = 5
negative × negativepositive(−4) × (−5) = 20,   (−20) ÷ (−4) = 5
positive × negativenegative4 × (−5) = −20,   20 ÷ (−4) = −5
negative × positivenegative(−4) × 5 = −20,   (−20) ÷ 4 = −5
Same signs give a positive answer; different signs give a negative answer.

Powers: (−2)2 = (−2) × (−2) = 4, but (−2)3 = (−2) × (−2) × (−2) = −8. An even number of negatives multiplied together is positive; an odd number is negative. Be careful: −22 without brackets means −(2 × 2) = −4.

Substituting directed numbers

To substitute, replace each letter by its value in brackets, then work it out using the order of operations (brackets, powers, × and ÷, then + and −). The brackets stop you losing a minus sign.

Worked examples

Example 1: Multiplying

Question: Work out
(a) −4 × 5
(b) −6 × (−3)
(c) 7 × (−2).

  1. (a) Different signs → negative: 4 × 5 = 20, so −20.
  2. (b) Same signs → positive: 6 × 3 = 18.
  3. (c) Different signs → negative: −14.

Answer:
(a) −20
(b) 18
(c) −14.

Example 2: Dividing

Question: Work out
(a) −24 ÷ 6
(b) −35 ÷ (−7)
(c) 40 ÷ (−8).

  1. (a) Different signs: −4.
  2. (b) Same signs: 5.
  3. (c) Different signs: −5.

Answer:
(a) −4
(b) 5
(c) −5.

Example 3: Powers

Question: Work out (−2)2 and (−2)3.

  1. (−2)2 = (−2) × (−2) = 4 (two negatives).
  2. (−2)3 = 4 × (−2) = −8 (three negatives).

Answer: 4 and −8.

Example 4: Substitution

Question: If a = −3, b = 4 and c = −2, find
(i) 3a + b
(ii) ab
(iii) a − c
(iv) a2
(v) 2b − 5c
(vi) ac2.

  1. (i) 3 × (−3) + 4 = −9 + 4 = −5.
  2. (ii) (−3) × 4 = −12.
  3. (iii) (−3) − (−2) = −3 + 2 = −1.
  4. (iv) (−3)2 = 9.
  5. (v) 2 × 4 − 5 × (−2) = 8 − (−10) = 8 + 10 = 18.
  6. (vi) (−3) × (−2) ÷ 2 = 6 ÷ 2 = 3.

Answer: −5, −12, −1, 9, 18, 3.

Example 5: A formula

Question: To change a temperature from °C to °F you can use F = 95C + 32. Find F when C = −5.

  1. Substitute in brackets: F = 95 × (−5) + 32.
  2. 95 × (−5) = 9 × (−5 ÷ 5) = 9 × (−1) = −9.
  3. −9 + 32 = 23.

Answer: 23 °F.

Directed numbers in real life

Multiplying directed numbers is useful whenever a change repeats. If the temperature on a mountain falls by 3 °C every hour, the change each hour is −3, and after 4 hours the total change is 4 × (−3) = −12 °C. If you owe $15 to each of 3 friends, your balance is 3 × (−15) = −$45. Running a video backwards at −2 times normal speed for 5 seconds moves the scene 10 seconds back in time: 5 × (−2) = −10.

Example 6: A falling temperature

Question: At 6 p.m. the temperature in a mountain town is 5 °C. It falls by 3 °C every hour. What is the temperature at 10 p.m.?

  1. From 6 p.m. to 10 p.m. is 4 hours.
  2. Total change = 4 × (−3) = −12 °C.
  3. New temperature = 5 + (−12) = 5 − 12 = −7.

Answer: −7 °C.

Common mistakes

  • Using the × rule for +. −3 + (−4) = −7, not 7. “Two negatives make a positive” is only for × and ÷ (and for subtracting a negative).
  • Leaving out brackets when substituting: if x = −3, then x2 = (−3)2 = 9, not −9.
  • Forgetting the order of operations: in 2b − 5c, multiply before subtracting.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Work out:
(a) −7 × 3
(b) −5 × (−4)
(c) 9 × (−1)
(d) −2 × (−3) × (−5).

Show answer

(a) −21
(b) 20
(c) −9
(d) 6 × (−5) = −30.

2. Work out:
(a) −18 ÷ 3
(b) −42 ÷ (−6)
(c) 36 ÷ (−9).

Show answer

(a) −6
(b) 7
(c) −4.

3. Work out (−5)2 and (−1)3.

Show answer

25 and −1.

4. If x = −2 and y = 5, find:
(a) 4x
(b) x + y
(c) y − x
(d) xy
(e) x2 + y
(f) 3x − 2y.

Show answer

(a) −8
(b) 3
(c) 5 − (−2) = 7
(d) −10
(e) 4 + 5 = 9
(f) −6 − 10 = −16.

5. If p = −6 and q = −3, find:
(a) pq
(b) pq
(c) p − q
(d) 2p + 5q.

Show answer

(a) 2
(b) 18
(c) −6 − (−3) = −3
(d) −12 + (−15) = −27.

6. In a quiz, a correct answer scores 3 points and a wrong answer scores −2. Ana gets 10 right and 4 wrong. Use 3r + (−2)w to find her score.

Show answer

3 × 10 + (−2) × 4 = 30 − 8 = 22 points.

Quick check

1. What is the sign of (−8) × (−9)?

Show answer

Positive (72).

2. What is −30 ÷ 5?

Show answer

−6.

3. If n = −4, what is n2?

Show answer

16.

Next: Number Patterns and Sequences: Finding the nth Term

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 2, Strand 1.1 Number Operations and Number Theory, Topic 1.1.3 Directed Numbers – Learning Outcome 1.1.3.3 (the four operations on directed numbers – multiplication and division here); and Strand 1.6 Algebra, Topic 1.6.2 Expressions – Learning Outcome 1.6.2.1 (substituting directed numbers for variables in expressions).

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.