FORM 2 • TERM 1 • LESSON 15
In the last lesson you showed relations with arrow diagrams. Another way to write a relation is as a list of ordered pairs. Ordered pairs are also how we give the position of a point on a grid, so in this lesson you will start to plot relations and spot when the points lie on a straight line. Next term you will study the Cartesian plane and straight-line graphs in more detail.
Learning outcomes
By the end of this lesson you should be able to:
- 2.2.3.1 – Explain what an ordered pair is.
- 2.2.3.2 – Write relations as sets of ordered pairs.
- 2.2.3.3 – Write down the domain and range of a set of ordered pairs.
- 2.2.3.4 – Find the rule linking the members of the domain and the range.
- 2.2.3.5 – Check whether an ordered pair satisfies a given relation.
- 2.2.3.6 – Write ordered pairs that satisfy a given relation.
- 2.2.3.7 – Plot a relation given as ordered pairs on the Cartesian plane.
- 2.2.3.8 – Check whether a set of ordered pairs shows a linear relationship.
What is an ordered pair?
An ordered pair is two numbers written in brackets, separated by a comma, where the order matters: (x, y). The first number is the input (from the domain) and the second is the output (from the range).
(2, 5) and (5, 2) are different ordered pairs. In a cinema, “row 2, seat 5” is not the same seat as “row 5, seat 2”.
Relations as sets of ordered pairs
Every arrow in an arrow diagram can be written as an ordered pair: the arrow 1 → 4 becomes (1, 4). For the relation “add 3” on the domain {1, 2, 3, 4}:
{(1, 4), (2, 5), (3, 6), (4, 7)}
- The domain is the set of first numbers: {1, 2, 3, 4}.
- The range is the set of second numbers: {4, 5, 6, 7}.
- If a number appears more than once, write it only once in the set.
Finding and checking the rule
To find the rule, look at how each second number is made from its first number. A table helps:
| x (first) | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| y (second) | 2 | 4 | 6 | 8 |
| How y is made | 2 × 1 | 2 × 2 | 2 × 3 | 2 × 4 |
So the rule is y = 2x. To check whether a pair fits a rule, substitute the first number and see if you get the second. For y = 2x − 1: (3, 5) fits because 2 × 3 − 1 = 5, but (4, 8) does not, because 2 × 4 − 1 = 7.
To write pairs that fit a rule, choose some inputs and work out the outputs. For y = 5 − x: (0, 5), (1, 4), (2, 3) and (−1, 6) all fit.
Plotting ordered pairs
A Cartesian plane has a horizontal x-axis and a vertical y-axis that cross at the origin O, the point (0, 0). To plot (x, y), start at O, move x across (right if positive, left if negative), then y up or down. Remember: “along the corridor, then up the stairs”.
Is it linear?
A relation is linear if its points lie on a straight line. You can check without drawing: when the x-values go up in equal steps, the y-values of a linear relation also go up (or down) in equal steps.
- {(1, 3), (2, 5), (3, 7), (4, 9)}: y goes up by 2 each time → linear.
- {(0, 0), (1, 1), (2, 4), (3, 9)}: y goes up by 1, 3, 5 → not linear (these points curve).
TRY ITPlot ordered pairs
Type a relation as ordered pairs, like (1, 3), (2, 5). Use whole numbers from −6 to 6 (use – for a minus sign). The points are plotted, and you get the domain, the range and whether the points lie on a straight line.
Worked examples
Example 1: From an arrow diagram
Question: An arrow diagram shows 2 → 6, 3 → 9, 5 → 15 and 6 → 18. Write it as a set of ordered pairs, and give the domain and range.
- Each arrow becomes a pair.
- First numbers: 2, 3, 5, 6. Second numbers: 6, 9, 15, 18.
Answer: {(2, 6), (3, 9), (5, 15), (6, 18)}; domain {2, 3, 5, 6}; range {6, 9, 15, 18}.
Example 2: Finding the rule
Question: Find the rule for {(0, 1), (1, 4), (2, 7), (3, 10)}.
- When x goes up by 1, y goes up by 3, so the rule starts y = 3x.
- When x = 0, y = 1, so add 1.
- Check (3, 10): 3 × 3 + 1 = 10. ✓
Answer: y = 3x + 1.
Example 3: Checking pairs
Question: Which of (2, 1), (4, 5), (−1, −5) satisfy y = 2x − 3?
- (2, 1): 2 × 2 − 3 = 1 ✓.
- (4, 5): 2 × 4 − 3 = 5 ✓.
- (−1, −5): 2 × (−1) − 3 = −5 ✓.
Answer: All three satisfy it.
Example 4: Writing pairs
Question: Write four ordered pairs that satisfy y = x² for x = −2, −1, 1, 2. Give the range.
- (−2)² = 4, (−1)² = 1, 1² = 1, 2² = 4.
Answer: (−2, 4), (−1, 1), (1, 1), (2, 4); range {1, 4}.
Example 5: Plotting and checking for a straight line
Question: Plot (−2, 4), (0, 3), (2, 2) and (4, 1). Is the relation linear?
- Plot each point: for (−2, 4) go 2 left and 4 up.
- x goes up by 2 each time and y goes down by 1 each time – equal steps.
Answer: Yes, it is linear (the rule is y = 3 − ½x).
Common mistakes
- Swapping the numbers. (3, 1) means x = 3, y = 1. Go across first, then up.
- Repeating numbers in the domain or range. Each value is listed once.
- Checking a rule with only one pair. A rule must work for every pair.
- Calling points linear because the x-values are in order. Check that the y-values change in equal steps when x changes in equal steps.
- Mixing up the axes. The x-axis goes across; the y-axis goes up.
Practice questions
Try these yourself first, then open each answer to check your working.
1. Are (4, 7) and (7, 4) the same ordered pair? Explain.
Show answer
No – the order matters. (4, 7) has x = 4, y = 7; (7, 4) has x = 7, y = 4.
2. Write as ordered pairs: the relation “is double” from {1, 2, 3, 4} (so 1 → 2, …).
Show answer
{(1, 2), (2, 4), (3, 6), (4, 8)}.
3. Give the domain and range of {(−1, 3), (0, 3), (2, 5), (4, 9)}.
Show answer
Domain {−1, 0, 2, 4}; range {3, 5, 9}.
4. Find the rule:
(a) {(1, 5), (2, 6), (3, 7)}
(b) {(1, 4), (2, 8), (3, 12)}
(c) {(0, −2), (1, 0), (2, 2)}.
Show answer
(a) y = x + 4
(b) y = 4x
(c) y = 2x − 2.
5. Which pairs satisfy y = 10 − 2x? (1, 8), (3, 5), (5, 0), (−1, 12).
Show answer
(1, 8), (5, 0) and (−1, 12). (3, 5) does not: 10 − 6 = 4.
6. Write three ordered pairs that satisfy y = 3x − 1.
Show answer
For example (0, −1), (1, 2), (2, 5).
7. Plot A(3, 2), B(−2, 4), C(−3, −1) and D(1, −4). In which quarter of the grid is each point?
Show answer
A top right, B top left, C bottom left, D bottom right.
8. Which sets are linear?
(a) {(0, 2), (1, 5), (2, 8), (3, 11)}
(b) {(1, 1), (2, 3), (3, 6), (4, 10)}
(c) {(−1, 4), (0, 4), (1, 4)}.
Show answer
(a) Linear (y goes up 3 each time)
(b) Not linear (steps 2, 3, 4)
(c) Linear (a flat line y = 4).
Quick check
1. In (5, −2), which number is the x-value?
Show answer
5.
2. Does (2, 7) satisfy y = 3x + 1?
Show answer
Yes: 3 × 2 + 1 = 7.
3. What is the origin?
Show answer
The point (0, 0) where the axes cross.
Previous: Relations and Arrow Diagrams: Domain, Range, Mappings and Functions
Next: The Cartesian Plane
Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 2, Term 1, Strand 2.2 Sets, Relations and Functions, Topic 2.2.3 Ordered Pairs – Learning Outcomes 2.2.3.1 (ordered pairs), 2.2.3.2 (relations as sets of ordered pairs), 2.2.3.3 (domain and range), 2.2.3.4 (the relation between the domain and range), 2.2.3.5 (verifying ordered pairs), 2.2.3.6 (writing ordered pairs for a relation), 2.2.3.7 (relations on the Cartesian plane) and 2.2.3.8 (linear relationships).
Updates
2026/10/23
– First version of this lesson.
2026/10/25
– Put each lettered part of the questions and answers on its own line.
2026/10/28
– Next lesson link now points to Lesson 16.
© 2026 Vedesh Kungebeharry. All rights reserved.
[…] Next: Ordered Pairs: Writing Relations as Pairs, Domain and Range, and Plotting Them […]
[…] Previous: Ordered Pairs: Writing Relations as Pairs, Domain and Range, and Plotting Them […]