Polygons and Tessellations: Names, Properties and How to Make Tessellating Patterns

A plane shape is a flat, two-dimensional (2D) shape. A polygon is a plane shape that is closed and made only of straight sides. Triangles, squares and hexagons are polygons; a circle is not (it is curved), and an open shape with a gap is not either. In this lesson you will name and classify polygons by their properties, and then use them to make tessellations – patterns that cover a surface with no gaps and no overlaps, like floor tiles or a honeycomb.

Naming polygons

Polygons are named by their number of sides. The number of vertices (corners) is always the same as the number of sides.

SidesNameEveryday example
3trianglea slice of pizza, a warning sign
4quadrilaterala page, a door, a kite
5pentagonthe outline of a simple house shape
6hexagona cell of a honeycomb, a nut for a bolt
7heptagon
8octagona STOP sign
9nonagon
10decagon
12dodecagonthe outline of the UK £1 coin

Classifying polygons by their properties

  • A regular polygon has all sides equal and all angles equal (for example a square or an equilateral triangle). An irregular polygon does not.
  • Count the sides and vertices, look for equal sides (often marked with small dashes), right angles (marked with a small square) and parallel sides (marked with arrows).
  • A diagonal joins two vertices that are not next to each other. A polygon with n sides has n(n − 3) ÷ 2 diagonals.
  • A convex polygon has every corner pointing outwards. A concave polygon has at least one corner pointing inwards, like an arrowhead.
  • You will study triangles and quadrilaterals in much more detail in Term 2.

Tessellations

A tessellation (or tiling) is a pattern of shapes that fit together to cover a flat surface completely, with no gaps and no overlaps. You can see tessellations in floor and wall tiles, brick walls, paving stones, honeycombs, patchwork quilts, fabric and gift-wrap patterns, and in the famous tilings of the Alhambra palace in Spain.

Close-up of a honeycomb made of many six-sided wax cells fitting together
Figure 1 – Bees build honeycomb from hexagons. Hexagons tessellate with no wasted space between the cells. Image: Merdal at Turkish Wikipedia, CC BY-SA 3.0, via Wikimedia Commons.

Which shapes tessellate?

Where the corners of the shapes meet at a point, the angles must add up to exactly 360° (a full turn). The corner angle of a regular triangle is 60°, of a square 90°, of a regular pentagon 108° and of a regular hexagon 120°.

  • Equilateral triangles: 6 × 60° = 360° ✔
  • Squares: 4 × 90° = 360° ✔
  • Regular hexagons: 3 × 120° = 360° ✔
  • Regular pentagons: 3 × 108° = 324°, which leaves a 36° gap, and 4 × 108° = 432° overlaps ✘

So only three regular polygons tessellate on their own: the equilateral triangle, the square and the regular hexagon. These are called regular tessellations. Two or more different regular polygons can also tessellate together – for example regular octagons and squares (135° + 135° + 90° = 360°), a pattern you often see on bathroom floors. And any triangle or any quadrilateral, even an irregular one, will tessellate if you rotate copies of it.

TRY ITRegular polygon and tessellation explorer

Move the slider to change the number of sides. Then press “Try to tessellate” to see whether copies of the shape fit together with no gaps.

Regular polygon

Wall covered in colourful interlocking geometric tiles in shades of green, blue, black and white
Figure 2 – A tessellation in the Alhambra, Granada, Spain. The artist M. C. Escher sketched this tiling in 1936 and it inspired his own famous interlocking designs. Image: gruban, CC BY-SA 2.0, via Wikimedia Commons.

Make your own tessellating tile

  1. Start with a square of card (about 6 cm by 6 cm).
  2. Cut a shape (a “nibble”) out of the top edge.
  3. Slide the piece straight down – do not turn it – and tape it to the bottom edge.
  4. Do the same from the left edge to the right edge if you like.
  5. Trace around your new tile over and over, fitting each copy against the last. Colour the pattern – maybe the tiles look like fish, birds or hibiscus flowers!

This works because whatever was removed from one side is added to the opposite side, so the tiles still fit together exactly, just like the original squares.

Worked examples

Example 1: Classifying a polygon

Question: A shape has 8 equal sides and 8 equal angles. Name it and state its number of vertices and diagonals.

  1. 8 sides → octagon. Equal sides and equal angles → regular.
  2. Vertices = number of sides = 8.
  3. Diagonals = 8 × (8 − 3) ÷ 2 = 8 × 5 ÷ 2 = 20.

Answer: A regular octagon with 8 vertices and 20 diagonals.

Example 2: Why regular pentagons do not tessellate

Question: Explain why regular pentagons cannot tessellate on their own.

  1. Each corner angle of a regular pentagon is 108°.
  2. Three pentagons at a point: 3 × 108° = 324°, which is less than 360°, so there is a 36° gap.
  3. Four pentagons: 4 × 108° = 432°, which is more than 360°, so they overlap.

Answer: No whole number of 108° angles makes exactly 360°, so there is always a gap or an overlap.

Example 3: A tiling problem

Question: A floor measures 3 m by 2 m. How many square tiles of side 25 cm are needed to cover it?

  1. Use the same units: 3 m = 300 cm and 2 m = 200 cm.
  2. Tiles along the length: 300 ÷ 25 = 12. Tiles along the width: 200 ÷ 25 = 8.
  3. Total: 12 × 8 = 96. (Check with areas: 60,000 cm2 ÷ 625 cm2 = 96 ✔)

Answer: 96 tiles.

Common mistakes

  • Calling a circle a polygon. Polygons have only straight sides.
  • Calling every 4-sided shape a “square”. A square is one special quadrilateral; rectangles, kites and trapeziums are quadrilaterals too.
  • Thinking all regular polygons tessellate. Only triangles, squares and hexagons do on their own.
  • Leaving tiny gaps when drawing a tessellation. Every edge must meet another edge exactly.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Name a polygon with
(a) 7 sides
(b) 10 sides.

Show answer

(a) heptagon
(b) decagon.

2. How many vertices does a hexagon have?

Show answer

6.

3. Which of these tessellate on their own: regular hexagon, regular pentagon, square, regular octagon, any triangle?

Show answer

Regular hexagon, square and any triangle.

4. In a square tiling, how many squares meet at each corner point, and what do their angles add up to?

Show answer

4 squares; 4 × 90° = 360°.

5. How many diagonals does a pentagon have?

Show answer

5 × (5 − 3) ÷ 2 = 5.

6. A wall 4 m wide and 3 m high is covered with square tiles of side 20 cm. How many tiles are needed?

Show answer

400 ÷ 20 = 20 tiles across and 300 ÷ 20 = 15 tiles up, so 20 × 15 = 300 tiles.

Quick check

1. What makes a shape a polygon?

Show answer

It is flat, closed and made only of straight sides.

2. What is a regular polygon?

Show answer

One with all sides equal and all angles equal.

3. What two rules must a tessellation follow?

Show answer

No gaps and no overlaps.

4. Why can hexagons tessellate?

Show answer

Three 120° corners make exactly 360° at each point.

Next: 3D Shapes: Faces, Edges, Vertices and Nets

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.4 Geometry, Topic 1.4.1 Solids and Plane Shapes – Learning Outcomes 1.4.1.4 (classifying polygons by their properties), 1.4.1.5 (creating tessellating patterns with plane shapes) and 1.4.1.6 (solving problems involving solids and plane shapes).

Attributions to media used in this post:

Honey comb.jpg – Merdal at Turkish Wikipedia – CC BY-SA 3.0 (via Wikimedia Commons)

Tassellatura alhambra.jpg – gruban – CC BY-SA 2.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.

Leave a Reply