Measuring: Choosing Instruments and Units, Reading Scales and Accuracy

FORM 2 • TERM 2 • LESSON 20

Measuring is everywhere: a tailor measuring cloth for a school uniform, a vendor weighing tomatoes at the market, a nurse taking your temperature, or a teacher timing the 100 m on Sports Day. In Form 1 you learned the units of measurement and about mass and weight. In Lesson 4 you rounded and estimated. In this lesson you will choose the right instrument and unit for a job, read scales carefully, and say how accurate a measurement is.

Learning outcomes

By the end of this lesson you should be able to:

  • 2.5.1.1 – Choose a suitable measuring instrument for a quantity.
  • 2.5.1.2 – Choose the most suitable unit for measuring a quantity.
  • 2.5.1.3 – Read and make sense of scales on measuring instruments.
  • 2.5.1.4 – Measure quantities to a stated degree of accuracy, including time on the 24-hour clock.

Choosing a measuring instrument

Different jobs need different tools. For length alone there are several instruments, depending on how long the object is and how accurate you need to be.

InstrumentMeasures, for example
Ruler or metre ruleShort lengths: a pencil, a page
Tape measureLonger lengths: a room, your waist
Trundle wheelLong distances: the school field
Vernier caliperSmall lengths: the width of a pipe
Micrometer screw gaugeVery small lengths: the thickness of a wire
Scale or balanceMass: flour, a bag of rice, you
Measuring cylinder or jugCapacity: medicine, water for cooking
ThermometerTemperature: body or air temperature
Clock or stopwatchTime: a race, a class period
ProtractorAngle: an angle in a triangle

A trundle wheel clicks once for every metre it rolls, so you count the clicks. A vernier caliper and a micrometer screw gauge are used in the science lab for lengths much smaller than a ruler can measure well.

Choosing the best unit

Choose a unit that gives a sensible number, not a huge one or a tiny decimal. You would give the length of your exercise book in centimetres, not kilometres!

QuantityUnits (small to large)Example
Lengthmm, cm, m, kmCoin thickness: mm. Door height: m.
Massmg, g, kg, tonneA mango: g. A bag of rice: kg.
Capacityml, lA spoon of medicine: ml. A bucket: l.
Temperature°CA hot day: about 32 °C.
Times, min, hA sprint: s. A football match: min.

Reading a scale

Most scales have only some marks labelled. To read a scale:

  1. Find two labelled marks next to each other, for example 30 and 40.
  2. Count the spaces (not the lines) between them, for example 5.
  3. Work out the value of one division: difference ÷ number of spaces. Here (40 − 30) ÷ 5 = 2.
  4. Count the divisions from the labelled mark just below the reading, and add.
A ruler marked in centimetres and millimetres. A bar starts at the 2 cm mark and ends at 9.4 cm, so it is 7.4 cm long 0 1 2 3 4 5 6 7 8 9 10 cm 7.4 cm starts at 2.0 ends at 9.4
Figure 1 – Each small division on this ruler is 1 mm (0.1 cm). The bar starts at 2.0 cm and ends at 9.4 cm, so its length is 9.4 − 2.0 = 7.4 cm.

When you measure with a ruler, line the start of the object up with the 0 mark if you can. If you start at another mark, as in Figure 1, subtract: end reading − start reading.

A measuring cylinder marked every 2 ml from 20 to 50 ml. The bottom of the curved water surface is at 34 ml, read with the eye level with it 20 30 40 50 ml 34 ml eye level
Figure 2 – On this measuring cylinder there are 5 spaces between 30 ml and 40 ml, so each division is 2 ml. Read the bottom of the curved surface (the meniscus) with your eye level with it: 34 ml.

Water in a narrow tube curves at the top. This curve is the meniscus. Read the bottom of the curve, with your eye level with the surface. If you look from above or below, the reading will be wrong. This error is called parallax.

A thermometer marked every 2 degrees Celsius from 0 to 50. The liquid reaches 32 degrees Celsius 0 10 20 30 40 50 °C 32 °C
Figure 3 – This thermometer has 5 spaces between 30 °C and 40 °C, so each division is 2 °C. The liquid is 1 division above 30, so the temperature is 32 °C.

Degree of accuracy

No measurement is exact. The smallest division on the scale limits how accurate you can be. A ruler marked in millimetres measures to the nearest millimetre (0.1 cm). A kitchen scale marked every 20 g measures to the nearest 20 g, or perhaps the nearest 10 g if you judge halfway.

When a measurement is rounded, the true value can be up to half a unit either side. The bar in Figure 1 is 7.4 cm to the nearest 0.1 cm, so its true length is from 7.35 cm up to (but not including) 7.45 cm. This is the same idea as rounding in Lesson 4.

ValueAccurate toTrue value lies
15 cmnearest cm14.5 cm to 15.5 cm
7.4 cmnearest 0.1 cm7.35 cm to 7.45 cm
250 gnearest 10 g245 g to 255 g
3 hnearest hour2.5 h to 3.5 h

Time and the 24-hour clock

Bus and ferry timetables, airline tickets and phones often use the 24-hour clock. It always uses four digits, and there is no a.m. or p.m.

  • For a.m. times, write the time with four digits: 7:05 a.m. is 07:05. Midnight is 00:00.
  • For p.m. times from 1:00 p.m. on, add 12 to the hours: 2:45 p.m. is 14:45. Noon is 12:00.
  • To find how long something takes, count on to the next hour, then on to the end time.

Worked examples

Example 1: Instrument and unit

Question: Choose an instrument and a unit for measuring
(a) the thickness of a $1 coin
(b) the length of the school corridor
(c) the mass of a bag of rice.

  1. A coin is very thin, so use a small, accurate instrument and a small unit.
  2. A corridor is long, so use something that measures long lengths.
  3. A bag of rice is heavy compared with a mango, so use kilograms.

Answer:
(a) vernier caliper, mm
(b) tape measure or trundle wheel, m
(c) scale, kg

Example 2: Reading a kitchen scale

Question: A kitchen scale is labelled 0, 100, 200, 300 g with 5 spaces between labels. The pointer is 3 divisions past 200. What is the mass?

  1. Value of one division: 100 ÷ 5 = 20 g.
  2. Reading: 200 + 3 × 20 = 260 g.

Answer: 260 g.

Example 3: Reading a measuring cylinder

Question: Use Figure 2. What volume of water is in the cylinder?

  1. There are 5 spaces between 30 ml and 40 ml, so each division is (40 − 30) ÷ 5 = 2 ml.
  2. The bottom of the meniscus is 2 divisions above 30.
  3. 30 + 2 × 2 = 34.

Answer: 34 ml.

Example 4: Limits of accuracy

Question: A piece of ribbon is 12.6 cm long, measured to the nearest millimetre. Between which values does its true length lie?

  1. The nearest millimetre is the nearest 0.1 cm. Half of 0.1 cm is 0.05 cm.
  2. 12.6 − 0.05 = 12.55 and 12.6 + 0.05 = 12.65.

Answer: from 12.55 cm up to 12.65 cm.

Example 5: A maxi-taxi journey

Question: A maxi-taxi leaves at 2:50 p.m. and arrives at 4:15 p.m.
(a) Write both times in the 24-hour clock.
(b) How long is the journey?

  1. 2:50 p.m. is 14:50 and 4:15 p.m. is 16:15.
  2. From 14:50 to 15:00 is 10 minutes. From 15:00 to 16:15 is 1 hour 15 minutes.
  3. 10 minutes + 1 hour 15 minutes = 1 hour 25 minutes.

Answer:
(a) 14:50 and 16:15
(b) 1 hour 25 minutes

Common mistakes

  • Counting lines instead of spaces. Between 30 and 40 with 4 small lines in between there are 5 spaces, so each is worth 2, not 2.5.
  • Starting the ruler at its edge. Many rulers have a gap before 0. Start at the 0 mark, or subtract the start reading.
  • Reading the meniscus from above. Keep your eye level with the bottom of the curve.
  • Using a silly unit. The mass of a pencil in kilograms gives a tiny decimal; use grams.
  • 24-hour clock slips. 15:00 is 3:00 p.m., not 5:00 p.m. Subtract 12 from the hours after noon.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Which instrument is best for measuring the diameter of a thin copper wire?
A. A metre rule
B. A tape measure
C. A micrometer screw gauge
D. A trundle wheel

Show answer

C. A micrometer screw gauge measures very small lengths, to about 0.01 mm.

2. Choose the best unit for each.
(a) The mass of an egg
(b) The length of a cricket pitch
(c) The capacity of a teaspoon
(d) The distance from Port of Spain to Arima

Show answer

(a) grams (g)
(b) metres (m)
(c) millilitres (ml)
(d) kilometres (km)

3. A scale is labelled 0, 10, 20, … with 5 equal spaces between each pair of labels. The pointer is 3 small divisions past 10. What is the reading?

Show answer

Each division is 10 ÷ 5 = 2. The reading is 10 + 3 × 2 = 16.

4. A measuring jug is labelled every 100 ml, with 4 spaces between labels. The juice is 2 divisions above the 300 ml mark. How much juice is in the jug?

Show answer

Each division is 100 ÷ 4 = 25 ml. The amount is 300 + 2 × 25 = 350 ml.

5. A leaf is placed on a ruler. One end is at 3.0 cm and the other end is at 11.7 cm. How long is the leaf, in cm and in mm?

Show answer

11.7 − 3.0 = 8.7 cm, which is 87 mm.

6. A bag of flour has a mass of 25 kg, correct to the nearest kilogram. Between which two values does its true mass lie?

Show answer

Between 24.5 kg and 25.5 kg (half of 1 kg either side).

7. On the thermometer in Figure 3, the liquid drops to 3 divisions above the 20 °C mark. What is the temperature now?

Show answer

Each division is 2 °C, so the temperature is 20 + 3 × 2 = 26 °C.

8. Write each time in the 24-hour clock.
(a) 7:05 a.m.
(b) 9:40 p.m.
(c) Write 00:15 in the 12-hour clock.

Show answer

(a) 07:05
(b) 21:40
(c) 12:15 a.m. (a quarter past midnight)

9. On Sports Day, Kemba ran 100 m in 12.4 seconds, timed to the nearest tenth of a second. What are the shortest and longest times she could really have taken?

Show answer

From 12.35 s up to 12.45 s. The time is within half of 0.1 s, which is 0.05 s, of 12.4 s.

Quick check

1. On a ruler marked in millimetres, what is each small division worth in centimetres?

Show answer

0.1 cm (1 mm).

2. Where do you read the level of water in a measuring cylinder?

Show answer

At the bottom of the curved surface (the meniscus), with your eye level with it.

3. What is 18:00 in the 12-hour clock?

Show answer

6:00 p.m.

Previous: Reflections in Horizontal and Vertical Mirror Lines on a Coordinate Grid

Next: Converting Units: Metric Units, Metric and Imperial, and Area Units

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 2, Term 2, Strand 2.5 Measurement, Topic 2.5.1 Units of Measurement and Conversion of Units – Learning Outcomes 2.5.1.1 (choosing measuring instruments), 2.5.1.2 (choosing suitable units), 2.5.1.3 (reading and interpreting scales) and 2.5.1.4 (measuring to a given degree of accuracy).

Updates

2026/10/28

– First version of this lesson.

© 2026 Vedesh Kungebeharry. All rights reserved.

Units of Measurement: Standard Units, Metric vs Imperial, and Converting mm, cm, m and km

To measure something is to compare it with a fixed amount called a unit. When you say a desk is 75 centimetres high, you mean it is as tall as 75 lots of one centimetre. In this lesson you will see why the world needed standard units, compare the metric and imperial systems, discover how the metric system works just like our base-ten number system, and practise measuring and converting lengths in millimetres, centimetres, metres and kilometres.

Why we need standard units

Long ago people measured with their bodies: a hand span, a foot, a pace, or a cubit (elbow to fingertip). These are non-standard units. They are handy, but everyone’s hand and foot are different sizes. Try it: measure the length of your desk in hand spans, then ask a friend to do the same. You will probably get different answers for the same desk!

Standard units are agreed by everyone and do not change from person to person, such as the metre, the kilogram and the second. With standard units, a carpenter in Trinidad, a factory in China and a builder in Canada all mean exactly the same length when they say “2 metres”. That makes fair trade, safe building and science possible.

Metric and imperial units

Two systems of standard units are still in use. The metric system (officially the International System of Units, SI) is used by almost every country, including Trinidad and Tobago and the rest of the Caribbean. The older imperial system came from Britain and is still used every day in the United States – and you will still hear it in the Caribbean too, for example when people give their height in feet and inches or buy lumber by the foot.

QuantityMetric unitsImperial unitsRough comparison
Lengthmillimetre, centimetre, metre, kilometreinch, foot, yard, mile1 inch = 2.54 cm exactly; 1 m is a little more than 1 yard (about 1.09 yd); 1 km is a little more than half a mile (about 0.62 mile)
Massgram, kilogram, tonneounce, pound, (long) ton1 kg is a little more than 2 pounds (about 2.2 lb); an imperial ton (about 1,016 kg) is a little more than a metric tonne (1,000 kg)
Capacitymillilitre, litrefluid ounce, pint, gallon1 UK gallon is about 4.5 litres; 1 US gallon is about 3.8 litres
Close-up of a tape measure marked in inches along one edge and centimetres along the other, with two coins for scale
Figure 1 – A tape measure with imperial units (inches, top) and metric units (centimetres, bottom). Notice that one inch is about two and a half centimetres. Image: Stilfehler, Public domain, via Wikimedia Commons.

The metric system works like place value

The metric system is built on tens, just like the denary number system from Place Value and Number Names. Each unit is 10, 100 or 1,000 times another, and the prefix tells you how many:

Prefixkilo-hecto-deca-(base unit)deci-centi-milli-
Meaning× 1,000× 100× 101÷ 10÷ 100÷ 1,000
Lengthkilometre (km)hectometre (hm)decametre (dam)metre (m)decimetre (dm)centimetre (cm)millimetre (mm)
Masskilogram (kg)hgdaggram (g)dgcgmilligram (mg)
Table 2 – Metric prefixes. Each step to the right is 10 times smaller, exactly like moving one place to the right in a place-value chart. The units used most in everyday life are km, m, cm and mm (and kg, g and mg).

So: 10 mm = 1 cm, 100 cm = 1 m, 1,000 mm = 1 m and 1,000 m = 1 km. Because every step is a power of ten, converting is just a matter of moving the decimal point.

Measuring length

Choose a sensible instrument and unit for the job:

  • Ruler (marked in cm and mm) – short lengths such as a pencil (about 17 cm) or the thickness of a book (mm).
  • Metre rule – heights of people and lengths of desks, in m and cm.
  • Measuring tape – rooms, gardens and long curved objects; it bends around corners.
  • Trundle wheel – long distances on the ground such as a sports field. Most school trundle wheels click once for every metre rolled.
  • For distances between towns, use kilometres (from a map or a car’s odometer).
A yellow measuring wheel with a long handle standing on a concrete road
Figure 2 – A surveyor’s measuring wheel (trundle wheel). Each full turn of the wheel covers a fixed distance, and a counter adds up the total. Image: FBenjr123, CC BY-SA 4.0, via Wikimedia Commons.

When measuring with a ruler, line the zero mark up with one end of the object (not the end of the ruler) and look straight down at the scale. Lengths can be recorded in more than one way: 3 m 10 cm = 3.1 m = 310 cm.

Converting between units

  • Changing to a smaller unit (for example m → cm)? You will need more of them, so multiply.
  • Changing to a bigger unit (for example m → km)? You will need fewer of them, so divide.
  • Multiplying by 10, 100 or 1,000 moves the decimal point 1, 2 or 3 places to the right; dividing moves it to the left.

TRY ITMetric length converter (with the working shown)

Type a length, choose the units, and see the answer together with the rule used to get it.

Key facts: 10 mm = 1 cm · 100 cm = 1 m · 1 000 mm = 1 m · 1 000 m = 1 km. Going to a smaller unit, multiply; going to a bigger unit, divide.

Worked examples

Example 1: Metres to centimetres

Question: Convert 4.5 m to centimetres.

  1. 1 m = 100 cm, and cm are smaller, so multiply by 100.
  2. 4.5 × 100 = 450 (move the decimal point 2 places right).

Answer: 450 cm.

Example 2: Metres to kilometres

Question: Convert 2,750 m to kilometres.

  1. 1 km = 1,000 m, and km are bigger, so divide by 1,000.
  2. 2,750 ÷ 1,000 = 2.75 (move the decimal point 3 places left).

Answer: 2.75 km.

Example 3: Millimetres to centimetres

Question: Convert 86 mm to centimetres.

  1. 10 mm = 1 cm, so divide by 10.
  2. 86 ÷ 10 = 8.6.

Answer: 8.6 cm.

Example 4: Mixed units

Question: Write 3 m 10 cm
(a) in metres
(b) in centimetres.

  1. (a) 10 cm = 10 ÷ 100 m = 0.1 m, so 3 m 10 cm = 3 + 0.1 = 3.1 m.
  2. (b) 3 m = 300 cm, so 3 m 10 cm = 300 + 10 = 310 cm.

Answer: 3.1 m; 310 cm.

Example 5: Adding lengths in different units

Question: A jogger runs 1.2 km, then 650 m, then 3,400 cm. How far is that in metres?

  1. Convert everything to metres first: 1.2 km = 1,200 m; 650 m stays 650 m; 3,400 cm = 3,400 ÷ 100 = 34 m.
  2. Add: 1,200 + 650 + 34 = 1,884.

Answer: 1,884 m (about 1.9 km).

Example 6: A length problem

Question: A roll of ribbon is 5 m long. How many 35 cm pieces can be cut from it, and how much ribbon is left over?

  1. Use the same unit: 5 m = 500 cm.
  2. 500 ÷ 35 = 14 remainder 10 (because 14 × 35 = 490, and 500 − 490 = 10).

Answer: 14 pieces, with 10 cm left over.

Common mistakes

  • Multiplying when you should divide. Ask: is the new unit bigger or smaller? 2,750 m is not 2,750,000 km!
  • Using the wrong number. There are 100 cm in a metre (not 1,000) and 1,000 m in a kilometre (not 100).
  • Adding different units. 2 m + 50 cm is 2.5 m (or 250 cm), not 52.
  • Measuring from the end of the ruler instead of from the zero mark.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Convert 7 m to centimetres.

Show answer

7 × 100 = 700 cm.

2. Convert 45 cm to metres.

Show answer

45 ÷ 100 = 0.45 m.

3. Convert 3.08 km to metres.

Show answer

3.08 × 1,000 = 3,080 m.

4. Convert 1,250 mm to metres.

Show answer

1,250 ÷ 1,000 = 1.25 m.

5. Put these lengths in order, smallest first: 1.5 m, 140 cm, 1,450 mm, 0.0016 km.

Show answer

In centimetres they are 150, 140, 145 and 160. So the order is 140 cm, 1,450 mm, 1.5 m, 0.0016 km.

6. A running track is 400 m around. How many laps make 5 km?

Show answer

5 km = 5,000 m, and 5,000 ÷ 400 = 12.5 laps.

7. Which unit would you use for
(a) the thickness of a coin
(b) the length of a football field
(c) the distance between two cities?

Show answer

(a) millimetres
(b) metres
(c) kilometres.

8. Roughly how many miles is a 10 km race? (1 km ≈ 0.62 mile)

Show answer

About 10 × 0.62 = 6.2 miles.

Quick check

1. Why are hand spans not a good unit for building a house?

Show answer

They are non-standard – different people’s hands are different sizes, so measurements would not agree.

2. What does the prefix “centi-” mean?

Show answer

One hundredth (÷ 100). A centimetre is one hundredth of a metre.

3. Which is longer: 1 metre or 1 yard?

Show answer

1 metre (about 1.09 yards).

4. To change kilometres to metres, do you multiply or divide by 1,000?

Show answer

Multiply – metres are smaller, so you need more of them.

Next: Perimeter and Area: Squares, Rectangles, Triangles and Compound Shapes

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.5 Measurement, Topic 1.5.1 Introducing Measurement – Learning Outcomes 1.5.1.1 (why standard units are needed), 1.5.1.2 (standard and non-standard units), 1.5.1.3 (comparing equivalent metric and imperial measures) and 1.5.1.4 (the metric system and the denary system); and Topic 1.5.2 Linear Measure – Learning Outcomes 1.5.2.1 (measuring length with suitable units and instruments), 1.5.2.2 (converting between mm, cm, m and km) and 1.5.2.3 (solving problems involving length).

Attributions to media used in this post:

Measuring Tape Inch+CM.jpg – Stilfehler – Public domain (via Wikimedia Commons)

Surveyor’s wheel 01.jpg – FBenjr123 – CC BY-SA 4.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.