Units of Measurement: Standard Units, Metric vs Imperial, and Converting mm, cm, m and km

To measure something is to compare it with a fixed amount called a unit. When you say a desk is 75 centimetres high, you mean it is as tall as 75 lots of one centimetre. In this lesson you will see why the world needed standard units, compare the metric and imperial systems, discover how the metric system works just like our base-ten number system, and practise measuring and converting lengths in millimetres, centimetres, metres and kilometres.

Why we need standard units

Long ago people measured with their bodies: a hand span, a foot, a pace, or a cubit (elbow to fingertip). These are non-standard units. They are handy, but everyone’s hand and foot are different sizes. Try it: measure the length of your desk in hand spans, then ask a friend to do the same. You will probably get different answers for the same desk!

Standard units are agreed by everyone and do not change from person to person, such as the metre, the kilogram and the second. With standard units, a carpenter in Trinidad, a factory in China and a builder in Canada all mean exactly the same length when they say “2 metres”. That makes fair trade, safe building and science possible.

Metric and imperial units

Two systems of standard units are still in use. The metric system (officially the International System of Units, SI) is used by almost every country, including Trinidad and Tobago and the rest of the Caribbean. The older imperial system came from Britain and is still used every day in the United States – and you will still hear it in the Caribbean too, for example when people give their height in feet and inches or buy lumber by the foot.

QuantityMetric unitsImperial unitsRough comparison
Lengthmillimetre, centimetre, metre, kilometreinch, foot, yard, mile1 inch = 2.54 cm exactly; 1 m is a little more than 1 yard (about 1.09 yd); 1 km is a little more than half a mile (about 0.62 mile)
Massgram, kilogram, tonneounce, pound, (long) ton1 kg is a little more than 2 pounds (about 2.2 lb); an imperial ton (about 1,016 kg) is a little more than a metric tonne (1,000 kg)
Capacitymillilitre, litrefluid ounce, pint, gallon1 UK gallon is about 4.5 litres; 1 US gallon is about 3.8 litres
Close-up of a tape measure marked in inches along one edge and centimetres along the other, with two coins for scale
Figure 1 – A tape measure with imperial units (inches, top) and metric units (centimetres, bottom). Notice that one inch is about two and a half centimetres. Image: Stilfehler, Public domain, via Wikimedia Commons.

The metric system works like place value

The metric system is built on tens, just like the denary number system from Place Value and Number Names. Each unit is 10, 100 or 1,000 times another, and the prefix tells you how many:

Prefixkilo-hecto-deca-(base unit)deci-centi-milli-
Meaning× 1,000× 100× 101÷ 10÷ 100÷ 1,000
Lengthkilometre (km)hectometre (hm)decametre (dam)metre (m)decimetre (dm)centimetre (cm)millimetre (mm)
Masskilogram (kg)hgdaggram (g)dgcgmilligram (mg)
Table 2 – Metric prefixes. Each step to the right is 10 times smaller, exactly like moving one place to the right in a place-value chart. The units used most in everyday life are km, m, cm and mm (and kg, g and mg).

So: 10 mm = 1 cm, 100 cm = 1 m, 1,000 mm = 1 m and 1,000 m = 1 km. Because every step is a power of ten, converting is just a matter of moving the decimal point.

Measuring length

Choose a sensible instrument and unit for the job:

  • Ruler (marked in cm and mm) – short lengths such as a pencil (about 17 cm) or the thickness of a book (mm).
  • Metre rule – heights of people and lengths of desks, in m and cm.
  • Measuring tape – rooms, gardens and long curved objects; it bends around corners.
  • Trundle wheel – long distances on the ground such as a sports field. Most school trundle wheels click once for every metre rolled.
  • For distances between towns, use kilometres (from a map or a car’s odometer).
A yellow measuring wheel with a long handle standing on a concrete road
Figure 2 – A surveyor’s measuring wheel (trundle wheel). Each full turn of the wheel covers a fixed distance, and a counter adds up the total. Image: FBenjr123, CC BY-SA 4.0, via Wikimedia Commons.

When measuring with a ruler, line the zero mark up with one end of the object (not the end of the ruler) and look straight down at the scale. Lengths can be recorded in more than one way: 3 m 10 cm = 3.1 m = 310 cm.

Converting between units

  • Changing to a smaller unit (for example m → cm)? You will need more of them, so multiply.
  • Changing to a bigger unit (for example m → km)? You will need fewer of them, so divide.
  • Multiplying by 10, 100 or 1,000 moves the decimal point 1, 2 or 3 places to the right; dividing moves it to the left.

TRY ITMetric length converter (with the working shown)

Type a length, choose the units, and see the answer together with the rule used to get it.

Key facts: 10 mm = 1 cm · 100 cm = 1 m · 1 000 mm = 1 m · 1 000 m = 1 km. Going to a smaller unit, multiply; going to a bigger unit, divide.

Worked examples

Example 1: Metres to centimetres

Question: Convert 4.5 m to centimetres.

  1. 1 m = 100 cm, and cm are smaller, so multiply by 100.
  2. 4.5 × 100 = 450 (move the decimal point 2 places right).

Answer: 450 cm.

Example 2: Metres to kilometres

Question: Convert 2,750 m to kilometres.

  1. 1 km = 1,000 m, and km are bigger, so divide by 1,000.
  2. 2,750 ÷ 1,000 = 2.75 (move the decimal point 3 places left).

Answer: 2.75 km.

Example 3: Millimetres to centimetres

Question: Convert 86 mm to centimetres.

  1. 10 mm = 1 cm, so divide by 10.
  2. 86 ÷ 10 = 8.6.

Answer: 8.6 cm.

Example 4: Mixed units

Question: Write 3 m 10 cm
(a) in metres
(b) in centimetres.

  1. (a) 10 cm = 10 ÷ 100 m = 0.1 m, so 3 m 10 cm = 3 + 0.1 = 3.1 m.
  2. (b) 3 m = 300 cm, so 3 m 10 cm = 300 + 10 = 310 cm.

Answer: 3.1 m; 310 cm.

Example 5: Adding lengths in different units

Question: A jogger runs 1.2 km, then 650 m, then 3,400 cm. How far is that in metres?

  1. Convert everything to metres first: 1.2 km = 1,200 m; 650 m stays 650 m; 3,400 cm = 3,400 ÷ 100 = 34 m.
  2. Add: 1,200 + 650 + 34 = 1,884.

Answer: 1,884 m (about 1.9 km).

Example 6: A length problem

Question: A roll of ribbon is 5 m long. How many 35 cm pieces can be cut from it, and how much ribbon is left over?

  1. Use the same unit: 5 m = 500 cm.
  2. 500 ÷ 35 = 14 remainder 10 (because 14 × 35 = 490, and 500 − 490 = 10).

Answer: 14 pieces, with 10 cm left over.

Common mistakes

  • Multiplying when you should divide. Ask: is the new unit bigger or smaller? 2,750 m is not 2,750,000 km!
  • Using the wrong number. There are 100 cm in a metre (not 1,000) and 1,000 m in a kilometre (not 100).
  • Adding different units. 2 m + 50 cm is 2.5 m (or 250 cm), not 52.
  • Measuring from the end of the ruler instead of from the zero mark.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Convert 7 m to centimetres.

Show answer

7 × 100 = 700 cm.

2. Convert 45 cm to metres.

Show answer

45 ÷ 100 = 0.45 m.

3. Convert 3.08 km to metres.

Show answer

3.08 × 1,000 = 3,080 m.

4. Convert 1,250 mm to metres.

Show answer

1,250 ÷ 1,000 = 1.25 m.

5. Put these lengths in order, smallest first: 1.5 m, 140 cm, 1,450 mm, 0.0016 km.

Show answer

In centimetres they are 150, 140, 145 and 160. So the order is 140 cm, 1,450 mm, 1.5 m, 0.0016 km.

6. A running track is 400 m around. How many laps make 5 km?

Show answer

5 km = 5,000 m, and 5,000 ÷ 400 = 12.5 laps.

7. Which unit would you use for
(a) the thickness of a coin
(b) the length of a football field
(c) the distance between two cities?

Show answer

(a) millimetres
(b) metres
(c) kilometres.

8. Roughly how many miles is a 10 km race? (1 km ≈ 0.62 mile)

Show answer

About 10 × 0.62 = 6.2 miles.

Quick check

1. Why are hand spans not a good unit for building a house?

Show answer

They are non-standard – different people’s hands are different sizes, so measurements would not agree.

2. What does the prefix “centi-” mean?

Show answer

One hundredth (÷ 100). A centimetre is one hundredth of a metre.

3. Which is longer: 1 metre or 1 yard?

Show answer

1 metre (about 1.09 yards).

4. To change kilometres to metres, do you multiply or divide by 1,000?

Show answer

Multiply – metres are smaller, so you need more of them.

Next: Perimeter and Area: Squares, Rectangles, Triangles and Compound Shapes

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 1, Strand 1.5 Measurement, Topic 1.5.1 Introducing Measurement – Learning Outcomes 1.5.1.1 (why standard units are needed), 1.5.1.2 (standard and non-standard units), 1.5.1.3 (comparing equivalent metric and imperial measures) and 1.5.1.4 (the metric system and the denary system); and Topic 1.5.2 Linear Measure – Learning Outcomes 1.5.2.1 (measuring length with suitable units and instruments), 1.5.2.2 (converting between mm, cm, m and km) and 1.5.2.3 (solving problems involving length).

Attributions to media used in this post:

Measuring Tape Inch+CM.jpg – Stilfehler – Public domain (via Wikimedia Commons)

Surveyor’s wheel 01.jpg – FBenjr123 – CC BY-SA 4.0 (via Wikimedia Commons)

Updates

2026/10/25

– Put each lettered part of the questions and answers on its own line.

© 2026 Vedesh Kungebeharry. All rights reserved.