FORM 2 • TERM 2 • LESSON 17
In Lesson 15 you wrote relations as ordered pairs and plotted them, and in Lesson 16 you learned to read and plot any point on the Cartesian plane. Now we put the two together. When the points of a relation lie on a straight line, the relation is called linear. In this lesson you will draw straight-line graphs from tables and rules, read information from a graph, show a real-life relation in several ways, and draw simple inequalities such as x ≥ 2 as shaded regions.
Learning outcomes
By the end of this lesson you should be able to:
- 2.2.4.1 – Read a straight-line graph as a picture of a linear relation.
- 2.2.4.2 – Draw graphs of relations on the Cartesian plane.
- 2.2.4.3 – Explain what makes a relationship linear.
- 2.2.4.4 – Show a real-life relation in different ways: words, a table, ordered pairs, a rule and a graph.
- 2.2.4.5 – Draw simple inequalities such as x > a or y ≤ b on the Cartesian plane and shade the region.
What is a linear relationship?
A relation is linear when all of its points lie on a straight line. You can often spot this from a table of values: when x goes up in equal steps, y goes up (or down) by the same amount every time.
Here is the table for the rule y = 2x + 1. To get each y-value, multiply x by 2, then add 1.
| x | y = 2x + 1 | Change in y |
|---|---|---|
| −3 | −5 | – |
| −2 | −3 | +2 |
| −1 | −1 | +2 |
| 0 | 1 | +2 |
| 1 | 3 | +2 |
| 2 | 5 | +2 |
Each time x goes up by 1, y goes up by 2. The change never varies, so the relation is linear. Compare the rule y = x × x: for x = 0, 1, 2, 3 it gives y = 0, 1, 4, 9. The jumps are 1, 3 and 5, which are not equal, so that relation is not linear and its graph is a curve.
Drawing a straight-line graph
To draw the graph of a rule such as y = 2x + 1 in your graph book:
- Make a table of values. Choose at least three x-values and work out y for each one.
- Draw the axes and choose a scale so that all your points fit. Label the axes.
- Plot each pair (x, y) from the table.
- Use a ruler to draw one straight line through the points. Extend it to the edge of the grid.
- Label the line with its rule.
Two points are enough to fix a straight line. The third point is your check: if your points do not line up, there is a mistake in the table.
Showing a relation in different ways
Real-life relations can be shown in several ways, and each one gives the same information. Here is one example.
In words: A candle is 12 cm tall when it is lit. It burns down 2 cm every hour.
As a table and as ordered pairs (t is the time in hours and h is the height in cm):
| Time t (hours) | Height h (cm) | Ordered pair (t, h) |
|---|---|---|
| 0 | 12 | (0, 12) |
| 1 | 10 | (1, 10) |
| 2 | 8 | (2, 8) |
| 3 | 6 | (3, 6) |
| 4 | 4 | (4, 4) |
| 5 | 2 | (5, 2) |
| 6 | 0 | (6, 0) |
As a rule: h = 12 − 2t. As a graph: see Figure 2. You could also draw an arrow diagram, as in Lesson 14.
Reading a graph
A graph is a picture of the relation, so you can read answers straight from it:
- The line slopes down from left to right, because the candle gets shorter as time goes on.
- Where the line starts on the height axis (t = 0) gives the starting height, 12 cm.
- Where the line meets the time axis (h = 0) tells you when the candle burns out: after 6 hours.
- Height after 2.5 hours: go up from 2.5 on the time axis to the line, then across to the height axis. The height is 7 cm.
- When is it 3 cm tall? Go across from 3 on the height axis to the line, then down. The time is 4.5 hours.
Check with the rule: 12 − 2 × 2.5 = 7 and 12 − 2 × 4.5 = 3. Values between the plotted points can be read from the line because the candle burns steadily.
Simple inequalities on the Cartesian plane
In Lesson 12 you showed inequalities such as x > 2 on a number line, with an open circle for < or > and a closed circle for ≤ or ≥. On the Cartesian plane we do something similar with a line and a shaded region.
First, the boundary line. Every point on the line x = 2 has an x-coordinate of 2, for example (2, −3), (2, 0) and (2, 4). So x = 2 is a vertical line. In the same way, y = −1 is a horizontal line.
- Draw the boundary line x = a or y = b.
- Make it solid for ≤ or ≥ (points on the line are included). Make it dashed for < or > (points on the line are not included).
- Shade the side you want: right of the line for x > a, left for x < a, above for y > b and below for y < b.
- Check with a test point from the shaded part.
| Inequality | Boundary line | Shade |
|---|---|---|
| x > a | x = a, dashed | right |
| x ≥ a | x = a, solid | right |
| x < a | x = a, dashed | left |
| x ≤ a | x = a, solid | left |
| y > b | y = b, dashed | above |
| y ≥ b | y = b, solid | above |
| y < b | y = b, dashed | below |
| y ≤ b | y = b, solid | below |
In this lesson we shade the region that we want. Some books shade the part that is not wanted instead, so always say clearly which region is your answer.
TRY ITStraight lines and shaded regions
1. Graph a rule
Choose the two numbers in the rule. You get a table of values for x = −2 to 2, the points, and the straight line through them.
2. Shade an inequality
Build an inequality to see its boundary line and shaded region. Then tap any crossing on the grid to test whether that point is in the region.
Worked examples
Example 1: Graph of y = 3 − x
Question: Make a table of values for y = 3 − x for x = −1 to 4, and describe the graph.
- For each x, work out 3 − x. For x = −1: 3 − (−1) = 4.
- The table gives y = 4, 3, 2, 1, 0, −1 for x = −1, 0, 1, 2, 3, 4.
- Plot (−1, 4), (0, 3), (1, 2), (2, 1), (3, 0) and (4, −1), and join them with a ruler.
Answer: A straight line that slopes down from left to right. It crosses the y-axis at (0, 3) and the x-axis at (3, 0).
Example 2: Linear or not?
Question: Which table shows a linear relation?
(a) x = 1, 2, 3, 4 gives y = 5, 8, 11, 14
(b) x = 1, 2, 3, 4 gives y = 1, 2, 4, 8
- In (a) the changes are +3, +3, +3: always the same.
- In (b) the changes are +1, +2, +4: not the same.
Answer:
(a) linear
(b) not linear.
Example 3: Doubles
Question: A doubles vendor sells doubles at $6 each.
(a) Make a table of the cost C for n = 0 to 5 doubles.
(b) Write a rule.
(c) How much do 4 doubles cost?
(d) How many doubles can you buy with $30?
- Each extra double adds $6, so the cost goes up by the same amount each time. The relation is linear.
- You can only buy whole doubles, so the graph is a set of points (0, 0), (1, 6), (2, 12) and so on. They still lie on a straight line.
Answer:
(a) n = 0, 1, 2, 3, 4, 5 gives C = 0, 6, 12, 18, 24, 30
(b) C = 6n
(c) $24
(d) 5 doubles.
Example 4: Naming a region
Question: A region is shaded to the left of a solid vertical line through (−3, 0). Write the inequality, and say whether (−4, 2) is in the region.
- The line is x = −3. It is solid, so the sign is ≤ or ≥. Left means smaller x-values, so x ≤ −3.
- For (−4, 2): x = −4, and −4 ≤ −3 is true.
Answer: x ≤ −3. Yes, (−4, 2) is in the region.
Example 5: Testing points
Question: Which of these points are in the region y > 1?
(0, 1), (3, 2), (−2, 5), (4, −1)
- Only the y-coordinate matters. Check whether it is greater than 1.
- 1 > 1 is false (the point is on the dashed line), 2 > 1 is true, 5 > 1 is true and −1 > 1 is false.
Answer: (3, 2) and (−2, 5).
Common mistakes
- Joining the dots freehand. A linear graph is one straight line drawn with a ruler, not a zig-zag from dot to dot.
- Slips with negative numbers. For y = 2x + 1 at x = −2, y = −4 + 1 = −3, not 5.
- Mixing up x = 2 and y = 2. x = 2 is a vertical line; y = 2 is a horizontal line.
- Solid or dashed? Use a solid line only for ≤ or ≥. For < or > the line is dashed.
- Shading the wrong side. Pick a point in your shaded part and check that it makes the inequality true.
Practice questions
Try these yourself first, then open each answer to check your working.
1. Copy and complete the table of values for y = x + 2, then plot the points and draw the line.
x: −3, −1, 1, 3
y: ?, ?, ?, ?
Show answer
y: −1, 1, 3, 5. The points (−3, −1), (−1, 1), (1, 3) and (3, 5) lie on one straight line.
2. Which of these tables show a linear relation?
(a) x = 0, 1, 2, 3 gives y = 1, 4, 7, 10
(b) x = 0, 1, 2, 3 gives y = 0, 1, 4, 9
(c) x = 0, 1, 2, 3 gives y = 10, 8, 6, 4
Show answer
(a) Linear: y goes up by 3 each time.
(b) Not linear: the jumps are 1, 3, 5, which are not equal.
(c) Linear: y goes down by 2 each time.
3. Do these points lie on the line y = 3x + 1?
(a) (2, 7)
(b) (4, 12)
(c) (−1, −2)
Show answer
(a) Yes: 3 × 2 + 1 = 7.
(b) No: 3 × 4 + 1 = 13, not 12.
(c) Yes: 3 × (−1) + 1 = −2.
4. Ravi has $40 in his savings tin and adds $10 every week.
(a) Make a table of his savings s for weeks w = 0 to 4.
(b) Write a rule for s.
(c) How much will he have after 6 weeks?
(d) After how many weeks will he have $120?
Show answer
(a) w = 0, 1, 2, 3, 4 gives s = 40, 50, 60, 70, 80.
(b) s = 40 + 10w.
(c) 40 + 10 × 6 = $100.
(d) 40 + 10w = 120, so 10w = 80 and w = 8 weeks.
5. Use Figure 2 (the candle).
(a) How tall is the candle after 1.5 hours?
(b) After how long is it 5 cm tall?
Show answer
(a) 12 − 2 × 1.5 = 9 cm.
(b) 12 − 2t = 5, so 2t = 7 and t = 3.5 hours.
6. Describe the boundary line and the shaded region for each inequality.
(a) x < 4
(b) y ≥ −2
Show answer
(a) A dashed vertical line x = 4, with the region to its left shaded.
(b) A solid horizontal line y = −2, with the region above it shaded (the line is included).
7. Which point is in the region x > −1?
A. (−1, 3)
B. (−3, 0)
C. (0, −5)
D. (−2, 2)
Show answer
C. (0, −5), because 0 > −1 is true. A is on the dashed line x = −1, so it is not included.
8. A region is shaded above a solid horizontal line that passes through (0, 3). Write the inequality for the region.
Show answer
y ≥ 3. The line is y = 3, it is solid (so ≥ or ≤), and the region is above it (so ≥).
9. Draw the graph of y = −x for x = −3 to 3. Where does the line cross the axes?
Show answer
The table gives y = 3, 2, 1, 0, −1, −2, −3. The line slopes down from left to right and crosses both axes at the origin (0, 0).
Quick check
1. What shape is the graph of a linear relation?
Show answer
A straight line.
2. Is the line x = 4 vertical or horizontal?
Show answer
Vertical. Every point on it has an x-coordinate of 4.
3. For y < 2, is the boundary line solid or dashed?
Show answer
Dashed, because points on the line y = 2 are not included.
Previous: The Cartesian Plane: Coordinates, Reading and Plotting Points
Next: Translations: Sliding Shapes on a Grid with Column Vectors
Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 2, Term 2, Strand 2.2 Sets, Relations and Functions, Topic 2.2.4 Graphical Representation of Linear Equations and Linear Inequalities – Learning Outcomes 2.2.4.1 (interpreting linear relations as graphs), 2.2.4.2 (drawing graphs on the Cartesian plane), 2.2.4.3 (linear relationships), 2.2.4.4 (representing real-world relations in different ways) and 2.2.4.5 (graphs of simple linear inequalities).
Updates
2026/10/28
– First version of this lesson.
© 2026 Vedesh Kungebeharry. All rights reserved.
