Decimals: Place Value, Number Names, Comparing and Ordering (Tenths, Hundredths and Thousandths)

Whole numbers count whole things, but real life is full of parts of a whole. A price tag says $12.75, a sprinter runs 100 m in 10.08 seconds, and a bag of flour has a mass of 2.25 kg. These numbers are decimals: the dot, called the decimal point, separates the whole-number part from the part that is less than one. In this lesson you will extend the place-value chart from Place Value and Number Names to the right of the point, read and write decimals in words, find the value of each digit, and compare and order decimals. Decimals are another way of writing the fractions you met in What Are Fractions?, so keep that lesson in mind.

Tenths, hundredths and thousandths

In our base-ten system, each place is worth ten times the place to its right. Going the other way, each place is worth one tenth of the place to its left. That pattern carries on past the ones place:

  • Split one whole into 10 equal parts: each part is one tenth, 110 = 0.1.
  • Split one whole into 100 equal parts: each part is one hundredth, 1100 = 0.01.
  • Split one whole into 1000 equal parts: each part is one thousandth, 11000 = 0.001.

Money is a good model. One dollar is 100 cents, so 10 cents is a tenth of a dollar ($0.10) and 1 cent is a hundredth of a dollar ($0.01). Length works too: a millimetre is one thousandth of a metre, so 1 mm = 0.001 m.

Base ten blocks: a single small cube, a rod of ten cubes and a flat square of one hundred cubes
Figure 1 – Base ten blocks. If the large flat stands for 1 whole, a rod is 0.1 and a small cube is 0.01. Image: BarbourLA, CC BY-SA 4.0, via Wikimedia Commons.

Showing a decimal in three ways

  • Concretely – with objects. Let a flat stand for 1, a rod for 0.1 and a small cube for 0.01. One flat, two rods and three cubes show 1.23.
  • Pictorially – with a drawing. Shade 23 squares of a 10 × 10 grid to show 0.23, or mark the point on a number line: 2.47 lies between 2.4 and 2.5, a little closer to 2.5.
  • Symbolically – with numerals and fractions: 0.3 = 310, 0.07 = 7100 and 0.125 = 1251000.

The decimal place-value chart

HundredsTensOnes•TenthsHundredthsThousandths
36•452
507•396
The numbers 36.452 and 507.396 on a place-value chart. There is no “oneths” place: the places are symmetrical about the ones place, not about the point.

The place value of a digit is the name of its column; its value is what it is worth. In 36.452 the digit 5 is in the hundredths place, so its value is 5 hundredths = 0.05. Writing a number as the sum of its digit values is called expanded form:

36.452 = 30 + 6 + 0.4 + 0.05 + 0.002 = 30 + 6 + 410 + 5100 + 21000

Reading and writing decimals in words

There are two common ways to say a decimal. Both are correct, and you should be able to match either one to the number and to the quantity it stands for.

NumberAs a fraction nameRead digit by digit
2.5two and five tenthstwo point five
0.36thirty-six hundredthszero point three six
4.205four and two hundred and five thousandthsfour point two zero five
12.043twelve and forty-three thousandthstwelve point zero four three

For the fraction name, read the digits after the point as one whole number, then say the name of the last place: 0.36 ends in the hundredths place, so it is “thirty-six hundredths”. When you read digit by digit, say each digit separately: 2.25 is “two point two five”, not “two point twenty-five”.

TRY ITDecimal place-value explorer

Type a decimal. The chart shows each digit in its place, and the explorer writes the number in words and in expanded form.

Place-value chart
Hun­dredsTensOnes•TenthsHun­dredthsThou­sandths
–––––––

Tip: each place is worth ten times the place to its right, and one tenth of the place to its left.

Comparing and ordering decimals

To compare decimals, line up the decimal points and compare the digits place by place from the left, just as you do with whole numbers. If the numbers have different numbers of decimal places, fill the gaps with zeros so they are the same length – zeros at the end of a decimal do not change its value (0.5 = 0.50 = 0.500).

Which is bigger, 0.5 or 0.45? Write them as 0.50 and 0.45. Both have 0 ones; in the tenths place 5 is more than 4, so 0.5 > 0.45. A longer decimal is not automatically a bigger one. On a number line, the bigger number is always further to the right.

Ascending order means smallest to largest; descending order means largest to smallest.

Worked examples

Example 1: The value of a digit

Question: What is the value of the 7 in 23.075?

  1. After the point the places are tenths (0), hundredths (7) and thousandths (5).
  2. The 7 is in the hundredths place.

Answer: Its value is 7 hundredths, 7100 or 0.07.

Example 2: Words to figures

Question: Write “twelve and forty-three thousandths” in figures.

  1. The whole-number part is 12.
  2. Forty-three thousandths must end in the thousandths place, the third place after the point, so it needs three digits: 043.

Answer: 12.043 (not 12.43, which is twelve and forty-three hundredths).

Example 3: Ascending order

Question: Write 0.6, 0.06, 0.65, 0.605 and 0.56 in ascending order.

  1. Fill with zeros: 0.600, 0.060, 0.650, 0.605, 0.560.
  2. Compare as if they were whole numbers of thousandths: 600, 60, 650, 605, 560.
  3. Smallest to largest: 60, 560, 600, 605, 650.

Answer: 0.06, 0.56, 0.6, 0.605, 0.65.

Example 4: A sprint final

Question: At a school sports day in San Fernando, four runners recorded 10.21 s, 10.12 s, 10.2 s and 10.09 s for the 100 m. List the times from fastest to slowest.

  1. Fastest means the smallest time, so this is ascending order.
  2. Fill with zeros: 10.21, 10.12, 10.20, 10.09.
  3. Compare the hundredths parts: 09, 12, 20, 21.

Answer: 10.09 s, 10.12 s, 10.2 s, 10.21 s.

Example 5: Expanded form to a number

Question: Write 5 + 0.3 + 0.008 as a single decimal.

  1. 5 ones, 3 tenths, no hundredths and 8 thousandths.
  2. Put a 0 in the empty hundredths place.

Answer: 5.308.

Common mistakes

  • Thinking a longer decimal is bigger. 0.45 has more digits than 0.5, but 0.5 = 0.50 is bigger.
  • Leaving out place-holding zeros. Forty-three thousandths is 0.043, not 0.43.
  • Reading 2.25 as “two point twenty-five”. Read the digits one at a time: two point two five.
  • Inventing a “oneths” place. The first place after the point is tenths.

Practice questions

Try these yourself first, then open each answer to check your working.

1. Write the place value and the value of the 9 in 507.396.

Show answer

Hundredths place; value 0.09 (9100).

2. Write 3.08 in words in two ways.

Show answer

Three and eight hundredths; three point zero eight.

3. Write 4 + 0.07 + 0.009 as a decimal.

Show answer

4.079.

4. Write 60.514 in expanded form.

Show answer

60 + 0.5 + 0.01 + 0.004.

5. Write 1.8, 1.08, 1.88 and 1.808 in descending order.

Show answer

1.88, 1.808, 1.8, 1.08.

6. Rainfall at three stations was 12.5 mm, 12.05 mm and 12.45 mm. Which station had the most rain?

Show answer

The one with 12.5 mm (12.50 is bigger than 12.45 and 12.05).

7. Which is greater: 9 tenths or 0.09? How many times greater?

Show answer

9 tenths = 0.9, which is ten times 0.09.

8. How many tenths are there in 2.7?

Show answer

27 tenths (2 wholes = 20 tenths, plus 7 tenths).

Quick check

1. What is the name of the third place after the decimal point?

Show answer

Thousandths.

2. Is 0.7 bigger or smaller than 0.69?

Show answer

Bigger: 0.70 > 0.69.

3. Write “five hundredths” as a decimal.

Show answer

0.05.

Next: Rounding Decimals, and Converting Between Fractions and Decimals

Curriculum link: This post is relevant to the Trinidad and Tobago National Lower Secondary (NCSE) Mathematics Curriculum – Form 1, Term 3, Strand 1.1 Number Operations and Number Theory, Topic 1.1.4 Decimals – Learning Outcomes 1.1.4.1 (representing decimals to thousandths concretely, pictorially and symbolically), 1.1.4.2 (matching number names to decimals and quantities), 1.1.4.3 (the place value and value of digits in decimals) and 1.1.4.4 (comparing and ordering decimals).

Attributions to media used in this post:

Base Ten Block.png – BarbourLA – CC BY-SA 4.0 (via Wikimedia Commons)

© 2026 Vedesh Kungebeharry. All rights reserved.